Selfhosted @lemmy.world Nugget @lemm.ee 12 mo. ago

Compact-ish NAS cases?

I'm looking for a suggestion for compact-ish NAS cases. I only have a few drives, 4 at the moment, so I don't need a ton of space. But I'd like to downsize without getting a brand new motherboard and PSU it possible (both are ATX at the moment).

My main requirement is being able to install and uninstall drives without worrying about cable management.

Thanks!

You're viewing a single thread.

44 comments

I got an Argon Eon case with a Raspberry Pi 4, but I'm regretting it because for some off reason my file transfer speeds via SMB are abysmal. I do have a heap of services selfhosted on the Pi and otherwise it's okay

Edit: If someone was able to get fast transfer speeds via SMB on a Raspberry Pi, I'd like to know how. If the speeds can be increased, my NAS would be perfect
- What software are you using
  
  I'm using all these, plus OpenMediaVault as the NAS operating system
  
  Try this in your SMB settings in OMV.
  
  socket options = TCP_NODELAY SO_RCVBUF=65536 SO_SNDBUF=65536 read raw = yes write raw = yes max xmit = 65535 dead time = 15 min receivefile size = 16384 write cache size = 524288 getwd cache = yes max connections = 65535 max open files = 65535 min protocol = smb3 max protocol = smb3
  
  It's possibly a hardware limitation. This is my settings
  
  socket options = TCP_NODELAY SO_RCVBUF=65536 SO_SNDBUF=65536 read raw = yes write raw = yes max xmit = 65535 dead time = 15 min receivefile size = 16384 write cache size = 524288 getwd cache = yes max connections = 65535 max open files = 65535 server multi channel support = yes allocation roundup size = 1048576 aio max threads = 100 aio read size = 1 aio write size = 1 server min protocol = SMB3_11 client ipc min protocol = SMB3_11
  
  What's your HDD model?
  
  I've got two of these https://www.amazon.com.au/Seagate-Barracuda-3-5-Inch-Internal-ST8000DM004/dp/B075WYBQXJ
  
  See if seachest is compatible with your drives. I think it's only compatible with Exos.
  
  Also are you running through USB?
  
  Yes all devices are through USB 3
  
  USB inherently has latency issues and protocol overhead. Seems like you're restricted to hardware unfortunately.
- This is interesting since I was planning on making my own RPi4 nas in the near future. Am I seeing correctly from the image that you have 1 (or 2?) 3,5" HDDs connected to some kind of HAT for the RPi (which has SATA connectors probably)?
  
  What speeds are you getting now?
  
  My plan was to connect 2x16TB HDDs to the pi through a USB->SATA cable, which probably is an even less stable setup than yours is but I was hoping it would be enough to do some basic NAS stuff.
  I was also planning on using OpenMediaVault like you are.
  
  I have two 3,5" HDDs connected as well as two SSDs (installed after the picture). They're connected via a USB dongle (through the back, so all drives go via USB 3.)
  
  The issue I'm facing is that I only get 10MB/s, even though I should be getting more, even through a USB 3 interface. I'm going to try the suggested SMB configuration from another user and report back shortly
  
  Your setup should be similar to mine. If you get good speeds, I'd love to know. OpenMediaVault is wonderful too - it's simple and gets the job done. But for my system there's no RAID, although that doesn't bother me because 1 HDD is primary, and 1 HDD is backup
  
  Ah so your setup is almost exactly as what I had planned :D (I'll use 1 SSD instead of 2 though, to be used as boot drive). I haven't made the box yet, probably in a few months.
  
  Thank you for the reply!
  Please do post your updates somewhere in this thread, I'm sure they'll come in handy when I start building my box.

You've viewed 44 comments.