WD80EDAZ-11TA3A0 not recognized by motherboard, is this fix okay ?
WD80EDAZ-11TA3A0 not recognized by motherboard, is this fix okay ?
My 8TB hard drive that I shucked isn't showing up on my motherboard. I've tried another HDD with the same SATA / PSU cables and that one is recognized fine, would removing the 3.3v pin that some cover with kapton tape permanently damage the drive at all? I see others saying it isn't an issue but don't want to lose any data. I just don't want to buy a whole role of tape I'll only use a sliver of.
You're viewing a single thread.
I just don't want to buy a whole role of tape I'll only use a sliver of.
For a quick test, I would be willing to cover the pin with regular scotch tape. Some people do remove the pin entirely, but I just use Kapton tape because it is reversible if needed.
If you have a Molex -> SATA power adapter cable, those will also sever the problematic 3.3V line.
Tried the scotch tape and everything worked as expected. Was also able to locate a small piece of Kapton tape so things are as they should. Thanks for the response.