Putting your device in a bag of rice ‘could allow small particles of rice to damage your iPhone’, the company warned
What you should not do:
Experts have for years pointed out that’s a bad idea – and now Apple is officially warning users not to do it.
“Don’t put your iPhone in a bag of rice. Doing so could allow small particles of rice to damage your iPhone,” the company says in a recent support note spotted by Macworld. Along with the risk of damage, testing has suggested uncooked rice is not particularly effective at drying the device.
What you should do:
If your phone isn’t functioning at all, turn it off right away and don’t press any buttons. The next steps depend on your specific circumstances, but broadly speaking: dry it with a towel and put it in an airtight container packed with silica packets if you have them. Don’t charge it until you’re sure it’s dry.
Stop putting your wet iPhone in rice, says Apple. Instead buy a new one because we make repairing it artificially expensive by restricting the manufactures from selling parts and we just replace the whole motherboard every time!
Oxygen absorber absorbs oxygen but not air or moisture whereas silica gel absorb moisture. Therefore, oxygen absorber is recommended if we want to maintain the level of humidity in the packaging and extend the freshness of food product.
For years, I've saved every silica packet in a coffee can. I stopped a while ago since I have a liter of them and the can is full.
Works great for drying things out.
I realize this is the advice in the article but wanted to point out that they build up quickly and come in just about everything that isn't food these days.
You know that they've been absorbing moisture from the air since they were put in with the thing you got them with, right? So by the time you use them for this they're saturated. You'd have to bake them to drive off the moisture and seal them to prevent them from absorbing more.
Not that any of this is particularly helpful for electronics with water in them. The damage comes from minerals dissolved in the water being deposited when the water evaporates, which causes shorts. You'd really have to rinse the board with distilled water or preferably isopropyl alcohol.
Sealed Illy coffee can for storage and excellent for drying out a phone with a moisture alert on the charging connection. You are probably correct about stuff that is thoroughly soaked but that's not what I use it for as that scenario doesn't seem to arise for me. I did once use this system to dry out my wife's phone that was not working after our toddler dropped it into a bucket or something and it was fine for a couple years after but I'm guessing gaskets prevented any moisture from getting too far since we pulled it out immediately.
But silica packets stop doing anything once they've absorbed moisture, and so aren't reusable once they've been exposed to normal air moisture. (Unless you've baked them to reactivate them). Is that not right? Because basically no one has a box full of re-baked silica packets hanging around ready for emergency usage.
I have like a gallon bucket of the stuff right now, Mind you its for drying out filament (3d printer), but if you are near and got a wet phone, look me up.
I found if the car is nearby, place the wet phone over the windscreen de-mister vent and then run the aircon through that vent. Doesn't have to be hot air to dry it as long as the compressor for the aircon is running... Aircon dries out the air before blowing it through the cabin so you will have bone dry air circulating around the phone pulling the moisture out by evaporation. About 10 mins is plenty. Best done idling in the shade. Don't want to sun damage the phone while trying dry it out...
No, hair dryer works by taking ambient air and heating it before blowing it out. Besides, definitely don't want to heat up the phone.
The aircon dries the air itself as part of the cooling.
When using your windscreen vents you don't have to set the temperature to hot to clear the windscreen as long as that aircon compressor is running. People just do because when you need to defog your windscreen it's usually cold as fuck outside...
To dry the phone, set vent to windscreen, temperature to cold, and make sure the aircon indicator on. Cold, dry air.
Salt absorbs water, and then it does something called caking. Which means it glues into large clumps of crystal when wet then dried, instead of reverting to tiny cubes. The idea of the rice has nothing to do with moisture but to prevent the clumps after the salt dries with a physical barrier. If you shake it in place after it dries, the rice also mechanically break the lumps. It's an old restaurant trick because they use commercial table salt, which is specifically made for and restaurants has no anticaking agents (usually some form of silicate) and no iodine, so it's taste is not metallic. That's how all salt used to be. But modern household table salt does include it, and as result doesn't cake and it remains granular no matter the moist.
No matter how your phone gets soaked – you’re caught in a downpour, you drop it in the bath or you fall in a pool – perhaps the best-known folk remedy is to put the device in a bag of rice.
Doing so could allow small particles of rice to damage your iPhone,” the company says in a recent support note spotted by Macworld.
Along with the risk of damage, testing has suggested uncooked rice is not particularly effective at drying the device.
The fix may have its origins in the history of photography: the Verge traces the method back as far as 1946 as a way to maintain your camera.
The next steps depend on your specific circumstances, but broadly speaking: dry it with a towel and put it in an airtight container packed with silica packets if you have them.
There are a few more instructions for iPhones dropped in water that are worth memorizing – because even if many of today’s phones are water-resistant, liquid disaster has a way of sneaking up on you.
The original article contains 372 words, the summary contains 177 words. Saved 52%. I'm a bot and I'm open source!
I've kinda figured out from YouTube repair videos Immediately disconnecting the battery then using pure alcohol and cleaning the components is probably the best solution.
Unfortunately by the stage I could even open my phone and remove the battery it would probably be wrecked anyway by my attempt to do so.
I used to buy these microwavable things (like a tiny cushion, has a patch on it that changes colour and you microwave to reset it) to dehumidify a certain window in my house. Wonder if they would work.