Fair.
A 5 year older controller is obviously going to be worse ,but the game support is valid
I manily use PETG because for me it is way stronger and easier to print than PLA (especially Prusa filament)
Super relaxing multiplayer
If you expect privacy on social media you should take an iq test
You can check card info and see if your order went through, get notifications and etc.
Online shopping.
But besides the ASMR is it better than PETG (considering building a fume hood for abs) and what brand.
Well ,that's of you are lucky and have a snapdragon a lot of newer mediateks don't even havo bootloader unlocks e.g. poco x6 pro
You sure you aren't swallowing compacted toothpaste?
Probably popularity but you can use fedora packages on opensuse
The anti-capitalist isn't the bad thing ,but a thing I have seen in absolutely all .ml users even the good ones.
Well it appears I took a jet to the finish line proably will need to look into what exactly makes cigarrete waste mor dangerous than the batteries 👍
My current pc specs are:
- Asus Prime H310M-K r2.0 (pcie 3.0 x16 max)
- I5-9400f
- Deep cool i35 cooler
- AMD Radeon Rx 580
- Kingston ddr4 1x16gb
- Corsair TX650
- Gigabyte G27Q monitor
- And two ssd's and a HDD
I have two options I have a budget of about 400 euros and I am thinking of upgrading as the PC is getting a little unresponsive in general use and gaming. Leaning towards option 1 as the cpu is almost always above 50% usage at idle as I use my PC as a server for jellyfin and some other services ,but with them off in-game the cpu is almost at 100% in tf2 and pretty much any other game and the gpu is at 70% unless in cs2 ,then if the quality is set any higher than low it is a literal slideshow.
Option 1:
- MSI Pro b650-s wifi
- AMD Ryzen 7600
- Crucial/Kingston ddr5 2x8gb
Option 2:
- Nvidia rtx 3060/3070 with broken HDMI output (both used)
Requirements:
- Motherboard Atx
- Cpu am5
- Must be available in Lithuania/EU for used parts only skelbiu.lt or eneba.lt