I'm looking for a new mechanical keyboard. Hoping for some advice. I used to have a Corsair K70 Pro, but unfortunately that no longer functions. I've been using a crappy dell keyboard from work and have finally been annoyed enough by it to buy a new keyboard.
I've considered going with another K70, but corsair doesn't give a shit about linux and I'm kicking windows outta my house. While I could emulate or build a vm, I'd rather just get a keyboard that doesn't make linux an afterthought if thought of at all. What I like about the K70 is that the keys aren't shrouded making it super easy to
Wants are:
100% full keyboard
Ideally no shrouding around the switches, minor shrouding would be okay.
A passthrough USB port on the keyboard for a mouse, to minimize wires and simpliy cable management.
Hotswap switches
Full Linux support
Backlit (ideally RGB, but I"m not doing any fancy profiles, just a solid color)
Media keys nice, but I can live without them.
Ideally not much more than $200
I'd prefer prebuilt, but at most minimal soldering would be acceptable, as long as it's nothing too small, my soldering skills are an embarrassment.
I've looked at the following already.
Ducky
All models I saw shrouded the switches. seem shrouded.
System76
Cost seems excessive and I don't really want a 96% keyboard.
DasKeyboard & Keychron
The models pretty much all shroud the switches too much, or they're low form factor.
The DasKeyboard 5QS comes close, and I might just go with it if I don't have a better option, but it's got more shrouding around the switches than I like. It also doesn't seem to have a secondary USB port.
I just saw this as well. I really like the bigger one on the left, would just need to be a full keyboard, maybe an additional USB port on the back as well.
https://lemmy.ml/post/10016605
I ordered a bunch of keyboards to try out.
I'm trying out some formatting here, so sorry if it looks like trash.
##KeyChron:
One thing I didn't realize about these keyboards is that you can switch between bluetooth devices using different keys on the keyboard. This was a big plus for the GF, since she hasn't been able to find a good keyboard that can do that. She is now probably taking a K5 Pro, even after throwing shade at me for buying a bunch of keyboards to test.
K10 (Gateron Brown switches)
This thing is fairly hefty, but reasonable. It's bulkier than I like, but others may like it plenty fine. It's keys are hot swappable. I used the brown switches that came with it. While the noise doesn't bother me that much, the GF, we'll just say she has feelings about this... This keyboard isn't SUPER loud, it's just a little louder than all the others I tried, it also a little higher pitch sound to it compared to the others I used.
K10 Pro (K Pro Brown switches)
This keyboard is big, and heavy. It's 3.5 pounds (1588 grams or something like that.) It's big, not a fan. I tried to use it, but it just feels to bulky. I could probably get used to it and it would probably really great if I actually was responsible and got a wrist rest, but that's not the only factor. I really don't like frames the cover the key switches. They just make cleaning annoying. Aside from bulk I do actually really like this keyboard. They have dampening foam to reduce noise, which the GF loves. The brown switches that come with it are fine, the key caps are also fine. I'd honestly probably get different switches and keys if I went with this keyboard, but that's an option. They switches are hotswappable and you can get a barebones model for just that. I really don't like the frame though.
K5 Pro (Red and Brown switch variants)
I'm going to start saying that I went into trying these keyboards expecting to hate them because they were low profile. I was wrong. I don't love them, but they aren't nearly as bad as I thought they would be.
These keyboards are fairly light, they're thin, and they feel pretty decent to type on, I don't like how short the stroke is, but I can live with it. I honestly don't hear much of a difference between the red and brown switches, which was surprising, but they do feel very different. The reds have more of a springy feel that you feel a pronounced difference in tension as you press them down, which wasn't nearly as pronounced in standard red switches in my opinion. I suspect that will become less pronounced as they wear in. The brown switches have a little actuation point to go over as one would expect, but doesn't have that pronounced spring tension. Personally I prefer the brown switches. I like that actuation feeling.
DasKeyboard
DasKeyboard 6 Pro (MX Brown Switches)
Honestly, I didn't really do much with this keyboard. I typed a bit and didn't like the sound or feel, the switches aren't hot swappable, and it has that frame covering the switches so I put it away. Others might like the switches and keys just fine, just wasn't for me. I also don't like the built in media buttons, built in media keys aren't a make or break, but them being tiny built in ones like that aren't a plus to me. I do however like the big ole knob. That could theoretically be programmed to something other than volume, which would be a positive if I'm doing something in like CAD or video editing or something that I don't do ALL that often. It does appear to have a USB-C hub, which I think is great. Still the frame, sound, and feel of the keyboard just wasn't for me, and it doesn't have hot-swappable keys and another big negative.
Notes about all keyboards:
Every one of the keyboards felt very well made and all seemed to have a decent attention to detail from the short period of time I spent with each of them. The packaging for each keyboard was what I would expect for a keyboard. There is foam around the keyboard separating it from the accessories and protecting the sides of the keyboard. All the Keychron keyboards were wrapped in a protective film dust cove, I'm guessing anti-static as well but maybe not? All the KeyChron keyboards had plastic cover over the keys is on all the keyboards to protect them, except the K10 Pro? Maybe I wasn't the first person to get the keyboard? The DasKeyboard also didn't have a plastic keycover. Honestly, I don't think the plastic key covers are all that necessary, but I'm not shipping expert. In any case, I don't really have anything negative to say about any of these keyboards, they're all really great quality. You just need to try them to see where your preferences are in the feel department.
Final thoughts.
If the K10 and K10 Pro weren't so bulky and didn't have that annoying frame, I'd probably just go with them, but they are BEASTS of keyboards. In the end, of the keyboards I tried out,
I'll likely just go with the K5 Pro with Brown switches for the time being. The primary reason being that there is no frame covering the switches making it easy for me to deal with my OCD of cleaning the damn keyboard way too damn much, The fact that I can use USB-C or Bluetooth to multiple devices, and it's very linux friendly/easily programmable. I'm again not in love with the low profile, but it's certainly not as off putting as I had originally thought. The brown switches are also acceptable as far as that goes.
In the end, I may just do exactly what I was hoping not I wouldn't have to do, build my own keyboard. I felt like I was going to go down that rabbit hole anyway, but I have a million hobbies, so I was hoping to save my wallet from another one.
Thanks everyone for your input. I do really appreciate everyone's input it was really helpful. Sounds like I have a rabbit hole to start going down with DIY keyboards, at least for a short while anyway.