United Airlines passengers to see targeted ads on seat-back screens
United Airlines passengers to see targeted ads on seat-back screens
United Airlines is personalizing in-flight marketing as the carrier seeks to cash in on passenger data.
You're viewing a single thread.
This just confirms my decision to never fly United again
Their seats did that for me. I'm 5'11", not a giant, and my knees were straight up jammed into the seat in front of me. Completely insane that they're even legally allowed to sell those to people as seats. They might fit a child.
What did it for me was a long delay that got me landed at my destination after car rental was closed
Not so much the delay itself; that upset me, but I get that things happen
It was the reason for the delay: a simple maintenance thing with the plane had them taking the engine further and further apart while we watched from the terminal, ultimately deciding they weren't getting this thing back up and running again anytime soon and having to get us another plane (which we had to wait for to fly to us)
Why couldn't they figure it out? Because they didn't have anyone who knew how to work on that plane model available
There are so many ways that pisses me off and makes me never want to trust them again
Also, every flight I had with them, including the return trip that I'd already booked from that trip, was miserable
Say what you will about Southwest but they know their damned planes inside and out and overall run their fleet efficiently and consistently. It's like riding a bus that flies
I've reluctantly come to the same conclusion.
The median age for an A&P licensed plane tech is 55. We'll welcome you to the ranks anytime.
I have no idea what it is you're trying to say here or how it relates to an airline running planes without having maintenance crews that can actually do the work on them... And that they worked on it anyway without apparently having the required training for it...
This comment directly speaks to your lack of understanding of how airline maintenance works. The point though is there are a shortage of maintenance personnel in the industry. People are retiring all the time and nobody is filling those billets once they leave. And airlines don't just have a maintenance crew at every airport because there's not enough, and it wouldn't be cost effective. Be as angry as you want that airlines are running on such terrible margins that they can't have a backup plane. But do understand that this is not the fault of the maintenance personnel.
Who's blaming the maintenance personnel? I'm expecting the airlines to actually have their maintenance crews trained for the planes they fly.
I don't think this is a particularly unrealistic expectation.
Nor do I think the expectation that crews without enough training on a plane to tear its engine apart and put it back together not be tasked with something that will have them tearing the engine apart.
I don't need to understand how the maintenance works to expect it be done correctly for something that's going to be moving my ass at hundreds of miles per hour, thousands of feet in the air.
I don't blame the maintenance personnel for not giving themselves adequate training on the machines they'll be servicing; that's on the airlines to ensure they get that before telling them to work on those planes. I don't blame the maintenance personnel for being ordered to then work on planes they don't have training on.
And if "that's just how the industry is", that doesn't make it any better.
Either way, flying with an airline that runs basically one model and can ensure every maintenance person knows that plane and every pilot knows that plane seems a good way to avoid the issue, so I'll stick with what I've got for now, thanks.
Did it ever occur to you that they don't just have maintenance personnel at every airport? Because what I'm saying is that no airline in the world has maintenance personnel at every airport.
Spirit, Frontier and Allegiant are Airbus only and would require an Airbus tech. Airbus planes are pretty decent on that the A19-A321 planes are pretty much exactly the same in parts and configuration except that some are longer and or wider than others. On the other side of things Southwest has only Boeing planes, mostly 737 and 747.
Pretty much every other airline has a mix of different planes (Boeing, Airbus, and Bombardier, Embraer). To do what you're talking about every airline that flies more than one plane would have to have a technician for each of those plane types on the ground at every airport they fly to. That's 5000 airports, with at least two technicians per airport (assuming they only have one flight in and out of there at a time which is ludicrous). The average number of flights going in and out of any one airport at a time. Daily there are about 45,000 flights per day per FAA statistics not including private flights.
At Delta's hub in Atlanta, there are around 2100-2700 flights per day. Delta says they have about 6,400 AMT's worldwide One singular airport out of 242 airports that Delta flies to. 24 hours a day for most airports. They would be required to keep at least 8 people per airport per average number of flights leaving or arriving per at the same time. Let's say that at their hub they only have 5 planes on the ground at any given time ( a gross miscalculation of how many planes fly into their hub, but the math is cleaner). Delta has 4 different plane manufacturers's planes in their fleet. That's 4 mechanics on an 8 or 12 hour shift multiplied by 5 planes let's say per average turn around time of 30 minutes. You'd need 20 techs At every single solitary airport Delta flies to. Per shift. Supplied by the airline. It's a logistical nightmare and this number balloons when you realise just how.many departures and arrivals there are and at what intervals at pretty much any major airport. 9,640 AMT's assuming 12 hour shifts. Just for domestic USA flights, not including planes that are down for maintenance outside regular maintenance schedule. When the fleet only emplyes 6,400 AMT's world wide.
I cannot stress this enough, but you're making a lot of assumptions here. And you don't think it's an unrealistic expectation specifically because you have no idea how any of this works.
Cool story.
I still fail to see how this makes it okay for techs to be told to tear apart an engine they weren't experienced with.
You can try to keep talking around how that's actually no big deal and I just don't get it. Totally your right. Just be aware that from my perspective you're trying to argue that it's acceptable to work on components without training that could cause a plane crash with people on board if it fails, and I just don't see how you can make that scenario okay, like, at all.
Because you don't understand what an A&P licensed Technician is or what the certification means. It also means you likely didn't understand what you were told about what was causing the delay.
By that I mean they probably initially had someone working on that plane who was new to being a tech. Which tracks because outside of recruiting from the military, a lot of AMT's recruited to the business are fresh out of highschool or college because that's when it's cheapest to hire them, and considering that older technicians are retiring every day. That technician was told there was a specific problem (let's say a fan cowl door won't latch). They open that door up to find that the reason it won't latch is because the latch is broken. To replace the latch they remove some parts, and then find that the reason it's broken is because some safety wire is broken off a bolt somewhere and wedged itself in such a way that it stressed that latch til it broke. Not only do they have to figure out where that safety wire came from, they have to do further teardown and inspection to make sure that there's no other damage. Unless you want to randomly lose an engine at 10k+ feet in the air where you can't pull over to the side of the road. And that's where being a subject matter expert on that particular model platform of plane would be preferred. Because while any AMT could find where that safety wire came from, not any AMT could do it on the Line without delaying a plane.
And that's why I said you were blaming Technicians. Because you were blaming Techs for the delay. Which in actuality was probably caused by something outside their control. Have a nice life dude. Your opinion is trash.
Yeah, no. I was very clear that I was not blaming the techs, but you go ahead, keep insisting on that.
I do not blame line workers for failings of management, which is exactly what I said I thought this was.
Maybe I am wrong here, wouldn't be the first time. If so, sorry for busting your chops like that. I've just seen too many businesses cutting corners and compromising safety to save a couple bucks, so maybe I'm overly jaded for this one. But the ire was NEVER directed at the techs.
United is still garbage and was miserable every time I flew with them, so regardless of the truth behind that incident I still stand by my decision to never fly with them again, and if that hadn't happened on that trip, the rest of the trip was enough to make me want nothing to do with them again.
But now you can silently judge your neighbors for the ads they are seeing.
Or be jealous.
Permanently Deleted