Well, two steps forwards, one step back. The scrub I ran yesterday at least showed some errors, but I'm having trouble identifying exactly what is the actual problem. I think I'll sleep on it and form a new plan in the morning.
Controller failure? RAM failure? Dmesg shows absolutely nothing, no panics no anything so I'm not thinking it's ram. Hmmmm... maybe I'll run mtest after I get some sleep.
3-2-1-backup@BackupServer:~$ sudo zpool status -vx
pool: data_pool3
state: ONLINE
status: One or more devices has experienced an error resulting in data
corruption. Applications may be affected.
action: Restore the file in question if possible. Otherwise restore the
entire pool from backup.
see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A
scan: scrub repaired 40K in 07:07:07 with 4 errors on Tue Nov 28 22:39:33 2023
config:
NAME STATE READ WRITE CKSUM
data_pool3 ONLINE 0 0 0
raidz2-0 ONLINE 0 0 0
wwn-0x5000ccax1 ONLINE 0 0 8
wwn-0x5000ccax2 ONLINE 0 0 10
wwn-0x5000ccax3 ONLINE 0 0 8
wwn-0x5000ccax4 ONLINE 0 0 8
wwn-0x5000ccax5 ONLINE 0 0 8
wwn-0x5000ccax6 ONLINE 0 0 8
wwn-0x5000ccax7 ONLINE 0 0 8
wwn-0x5000ccax8 ONLINE 0 0 8
errors: Permanent errors have been detected in the following files:
data_pool3/(redacted)/downloads@backup_script-2023-11-28-0901:/(redacted).mkv
data_pool3/(redacted)@backup_script-2023-11-28-2001:/ISOs/Ubuntu/23.10/ubuntu-23.10.1-desktop-amd64.iso
data_pool3/(redacted)@backup_script-2023-11-07-0901:/(redacted).mkv
Hey wow, even though my problem is getting worse (maybe), an actual honest-to-god ISO showed up in the problem file list!
This is my backup server, so no. Primary does.
So just getting around to checking my logs on my backup server, and it says that I have a permanently damaged file that's un-repairable.
How is this even possible on a raidz2 volume where each member shows zero problems and no dead drives? Isn't that whole point of raidz2, so that if one (er, two) drives have a problem the data is recoverable? How can I figure out why this happened and why it was unrecoverable, and most importantly, prevent it in the future?
It's only my backup server and the original file is still A-OK, but I'm really concerned here!
zpool status -v:
3-2-1-backup@BackupServer:~$ sudo zpool status -v pool: data_pool3 state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 06:59:59 with 1 errors on Sun Nov 12 07:24:00 2023 config:
NAME STATE READ WRITE CKSUM data_pool3 ONLINE 0 0 0 raidz2-0 ONLINE 0 0 0 wwn-0x5000ccaxxxxxxxx1 ONLINE 0 0 0 wwn-0x5000ccaxxxxxxxx2 ONLINE 0 0 0 wwn-0x5000ccaxxxxxxxx3 ONLINE 0 0 0 wwn-0x5000ccaxxxxxxxx4 ONLINE 0 0 0 wwn-0x5000ccaxxxxxxxx5 ONLINE 0 0 0 wwn-0x5000ccaxxxxxxxx6 ONLINE 0 0 0 wwn-0x5000ccaxxxxxxxx7 ONLINE 0 0 0 wwn-0x5000ccaxxxxxxxx8 ONLINE 0 0 0
errors: Permanent errors have been detected in the following files:
data_pool3/(redacted)/(redacted)@backup_script:/Documentaries/(redacted)
zfs --version also does the trick.
Makes me really glad I almost never bother to upgrade my pool flags!
(I mean seriously, I can't think of the last time I had a use for new flags!)
I'm going to disagree with you there, it's completely situationally dependent. I tried running a wifi point-to-point link from my house to my detached garage, ran like hot garbage. Replaced the link with powerline, was much more stable and faster.
Right tool for the right job. Well really the right tool is to bury something (preferably fiber) between the buildings, but I'm not made out of money and the power line was already buried!