F for failure... But anything after Y (Yield strength) is permanently altered...
A lot of people who come into the museum do that, do they?
Holy crap, nice description.
Looked into this myself, here's a brief summary of my thoughts:
V2 has the flying gantry, Trident has the moving base. Primary difference is that since the base (i.e., print surface) is physically secured and rigid to the frame, bed meshes and other alignments should be more consistent. In other words, run a mesh once (or a few times for each of different bed temperatures) and never need to create the mesh again. All else being equal, the flying gantry is a more idealized option since the base in contact with the print is stationary, so very little force is ever seen by the model itself (short of small x and y forces while printing).
Now the trade off is the significantly added complexity of 4 independent z-motors supporting the gantry. In addition, this requires a gantry alignment macro each time the motors are powered off/on since the gantry sags asymmetrically if the motors aren't locked (requiring power).
I have built a V2.4 and found it great, but I don't know if I personally have found it worth it to have the fixed bed and additional motors. It's nice to say I did, and it works, but if I needed to make another, I would absolutely go Trident. Cheaper and simpler, and it's not an ideal world so many of the supposed benefits don't really make a big difference.
We need to accept a premium for the cleanest and safest baseload generation we have.
Also, it's bad because it's Discovery
You can use modeling software (or even some slicers) to pre-position or stitch the parts in place.
That is sad but nice. I left mine in a spinach field.
Which was sold to a foreign entity by the same government saying it's underused.
The conservative party is such a drain on prosperity for all... and now the leopards are eating the faces of the rurals that voted for them. And they won't learn.
Current switch does 1080 docked already , so while I hope it'll have at least 4k menus and 4k light games, I'd settled for 1080 again with some sorta more advanced AA for first party games