I have enabled TMDb Box Sets Plugin and it creates collections automatically well. But the problem is that artwork isn't downloaded. When I go to a given collection -> Edit images -> Search, no image is found.
Movies artwork is working perfectly, I can also go to edit images and search and get more results.
Do you have any idea what the problem is?
The problem is already solved (At least I found the bug and a temporary solution) At the beginning of the post there is a link to the bug report.
I found the problem! It was actually the kernel, just both the latest and the lts versions released after 11th of August don't work. So for now I need to stick to the versions from 11th. Thank you very much for the help!
Edit: this is the bug
This is the log https://ufile.io/p5wj1hu0
I'm not sure if this is relevant, but I added pci=nommconf to the kernel parameters as I had errors similar to the one in this topic, otherwise the log was over 40 000 lines long.
Edit: I'm not sure if this is exactly a kernel problem, as I get the same error when booting with the LTS kernel, which is older than the one installed with the offline installer.
Could you please take a look at the comments from abrer and Illecors, I have shares a lot of info there.
dracut: dracut module 'dash' will not be installed, because command 'dash' could not be found!
dracut: dracut module 'mksh' will not be installed, because command 'mksh' could not be found!
dracut: dracut module 'busybox' will not be installed, because command 'busybox' could not be found!
dracut: dracut module 'dbus-broker' will not be installed, because command 'dbus-broker' could not be found!
dracut: dracut module 'rngd' will not be installed, because command 'rngd' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmand' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmanctl' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
dracut: dracut module 'network-wicked' will not be installed, because command 'wicked' could not be found!
dracut: dracut module 'dmraid' will not be installed, because command 'kpartx' could not be found!
dracut: dracut module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsi-iname' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsiadm' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsid' could not be found!
dracut: dracut module 'nvmf' will not be installed, because command 'nvme' could not be found!
dracut: dracut module 'biosdevname' will not be installed, because command 'biosdevname' could not be found!
dracut: dracut module 'memstrack' will not be installed, because command 'memstrack' could not be found!
dracut: memstrack is not available
dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
dracut: dracut module 'squash' will not be installed, because command 'mksquashfs' could not be found!
dracut: dracut module 'squash' will not be installed, because command 'unsquashfs' could not be found!
dracut: dracut module 'dash' will not be installed, because command 'dash' could not be found!
dracut: dracut module 'mksh' will not be installed, because command 'mksh' could not be found!
dracut: dracut module 'busybox' will not be installed, because command 'busybox' could not be found!
dracut: dracut module 'dbus-broker' will not be installed, because command 'dbus-broker' could not be found!
dracut: dracut module 'rngd' will not be installed, because command 'rngd' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmand' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmanctl' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
dracut: dracut module 'network-wicked' will not be installed, because command 'wicked' could not be found!
dracut: dracut module 'dmraid' will not be installed, because command 'kpartx' could not be found!
dracut: dracut module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsi-iname' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsiadm' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsid' could not be found!
dracut: dracut module 'nvmf' will not be installed, because command 'nvme' could not be found!
dracut: dracut module 'memstrack' will not be installed, because command 'memstrack' could not be found!
dracut: memstrack is not available
dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
dracut: dracut module 'squash' will not be installed, because command 'mksquashfs' could not be found!
dracut: dracut module 'squash' will not be installed, because command 'unsquashfs' could not be found!
dracut: *** Including module: systemd ***
dracut: *** Including module: systemd-initrd ***
dracut: *** Including module: i18n ***
dracut: *** Including module: kernel-modules ***
dracut: *** Including module: kernel-modules-extra ***
dracut: *** Including module: rootfs-block ***
dracut: *** Including module: terminfo ***
dracut: *** Including module: udev-rules ***
dracut: Skipping udev rule: 40-redhat.rules
dracut: Skipping udev rule: 50-firmware.rules
dracut: Skipping udev rule: 50-udev.rules
dracut: Skipping udev rule: 91-permissions.rules
dracut: Skipping udev rule: 80-drivers-modprobe.rules
dracut: Skipping udev rule: 70-persistent-net.rules
dracut: *** Including module: dracut-systemd ***
dracut: *** Including module: usrmount ***
dracut: *** Including module: base ***
dracut: *** Including module: fs-lib ***
dracut: *** Including module: shutdown ***
dracut: *** Including modules done ***
dracut: *** Installing kernel module dependencies ***
dracut: *** Installing kernel module dependencies done ***
dracut: *** Resolving executable dependencies ***
dracut: *** Resolving executable dependencies done ***
dracut: *** Hardlinking files ***
dracut: Mode: real
dracut: Method: memcmp
dracut: Files: 780
dracut: Linked: 2 files
dracut: Compared: 0 xattrs
dracut: Compared: 38 files
dracut: Saved: 356.65 KiB
dracut: Duration: 0.010006 seconds
dracut: *** Hardlinking files done ***
dracut: *** Generating early-microcode cpio image ***
dracut: *** Store current command line parameters ***
dracut: *** Stripping files ***
dracut: *** Stripping files done ***
dracut: *** Creating image file '/efi/69f1b920c192454c97831ba6e72bf777/6.4.12-arch1-1/initrd' ***
dracut: *** Creating initramfs image file '/efi/69f1b920c192454c97831ba6e72bf777/6.4.12-arch1-1/initrd' done ***
(4/5) Check if user should be informed about rebooting after certain system package upgrades.
(5/5) Checking which packages need to be rebuilt
I updated only the kernel and I got the following:
:: kernel-install installing kernel 6.4.12-arch1-1
dracut: Executing: /usr/bin/dracut --no-hostonly --force /efi/69f1b920c192454c97831ba6e72bf777/6.4.12-arch1-1/initrd-fallback 6.4.12-arch1-1
dracut: dracut module 'dash' will not be installed, because command 'dash' could not be found!
dracut: dracut module 'mksh' will not be installed, because command 'mksh' could not be found!
dracut: dracut module 'busybox' will not be installed, because command 'busybox' could not be found!
dracut: dracut module 'dbus-broker' will not be installed, because command 'dbus-broker' could not be found!
dracut: dracut module 'rngd' will not be installed, because command 'rngd' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmand' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmanctl' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
dracut: dracut module 'network-wicked' will not be installed, because command 'wicked' could not be found!
dracut: dracut module 'dmraid' will not be installed, because command 'kpartx' could not be found!
dracut: dracut module 'multipath' will not be installed, because command 'multipath' could not be found!
dracut: dracut module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
dracut: dracut module 'fcoe' will not be installed, because command 'dcbtool' could not be found!
dracut: dracut module 'fcoe' will not be installed, because command 'fipvlan' could not be found!
dracut: dracut module 'fcoe' will not be installed, because command 'lldpad' could not be found!
dracut: dracut module 'fcoe' will not be installed, because command 'fcoemon' could not be found!
dracut: dracut module 'fcoe' will not be installed, because command 'fcoeadm' could not be found!
dracut: dracut module 'fcoe-uefi' will not be installed, because command 'dcbtool' could not be found!
dracut: dracut module 'fcoe-uefi' will not be installed, because command 'fipvlan' could not be found!
dracut: dracut module 'fcoe-uefi' will not be installed, because command 'lldpad' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsi-iname' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsiadm' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsid' could not be found!
dracut: dracut module 'nbd' depends on 'network', which can't be installed
dracut: dracut module 'nvmf' will not be installed, because command 'nvme' could not be found!
dracut: dracut module 'biosdevname' will not be installed, because command 'biosdevname' could not be found!
dracut: dracut module 'memstrack' will not be installed, because command 'memstrack' could not be found!
dracut: memstrack is not available
dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
dracut: dracut module 'squash' will not be installed, because command 'mksquashfs' could not be found!
dracut: dracut module 'squash' will not be installed, because command 'unsquashfs' could not be found!
dracut: *** Including module: systemd ***
dracut: *** Including module: systemd-initrd ***
dracut: *** Including module: modsign ***
dracut: *** Including module: i18n ***
dracut: *** Including module: btrfs ***
dracut: *** Including module: crypt ***
dracut: *** Including module: dm ***
dracut: Skipping udev rule: 64-device-mapper.rules
dracut: Skipping udev rule: 60-persistent-storage-dm.rules
dracut: Skipping udev rule: 55-dm.rules
dracut: *** Including module: kernel-modules ***
dracut: *** Including module: kernel-modules-extra ***
dracut: *** Including module: lvm ***
dracut: Skipping udev rule: 64-device-mapper.rules
dracut: Skipping udev rule: 56-lvm.rules
dracut: Skipping udev rule: 60-persistent-storage-lvm.rules
dracut: *** Including module: mdraid ***
dracut: Skipping udev rule: 64-md-raid.rules
dracut: *** Including module: nvdimm ***
dracut: *** Including module: qemu ***
dracut: *** Including module: qemu-net ***
dracut: *** Including module: lunmask ***
dracut: *** Including module: resume ***
dracut: *** Including module: rootfs-block ***
dracut: *** Including module: terminfo ***
dracut: *** Including module: udev-rules ***
dracut: Skipping udev rule: 40-redhat.rules
dracut: Skipping udev rule: 50-firmware.rules
dracut: Skipping udev rule: 50-udev.rules
dracut: Skipping udev rule: 91-permissions.rules
dracut: Skipping udev rule: 80-drivers-modprobe.rules
dracut: *** Including module: virtiofs ***
dracut: *** Including module: dracut-systemd ***
dracut: *** Including module: usrmount ***
dracut: *** Including module: base ***
dracut: *** Including module: fs-lib ***
dracut: *** Including module: shutdown ***
dracut: *** Including modules done ***
dracut: *** Installing kernel module dependencies ***
dracut: *** Installing kernel module dependencies done ***
dracut: *** Resolving executable dependencies ***
dracut: *** Resolving executable dependencies done ***
dracut: *** Hardlinking files ***
dracut: Mode: real
dracut: Method: memcmp
dracut: Files: 1987
dracut: Linked: 8 files
dracut: Compared: 0 xattrs
dracut: Compared: 449 files
dracut: Saved: 1.42 MiB
dracut: Duration: 0.022128 seconds
dracut: *** Hardlinking files done ***
dracut: *** Generating early-microcode cpio image ***
dracut: *** Constructing AuthenticAMD.bin ***
dracut: *** Store current command line parameters ***
dracut: *** Stripping files ***
dracut: *** Stripping files done ***
dracut: *** Creating image file '/efi/69f1b920c192454c97831ba6e72bf777/6.4.12-arch1-1/initrd-fallback' ***
dracut: *** Creating initramfs image file '/efi/69f1b920c192454c97831ba6e72bf777/6.4.12-arch1-1/initrd-fallback' done ***
dracut: Executing: /usr/bin/dracut --hostonly --no-hostonly-cmdline -f /efi/69f1b920c192454c97831ba6e72bf777/6.4.12-arch1-1/initrd 6.4.12-arch1-1
(Continues in the second comment)
they are under /02ef85f9edc146d598502c1b296ff64a/6.4.12-arch1-1/, but yes.
EndeavourOS is using dracut by default.
Edit: we tried rebuilding initramfs before, but it didn't help
I have already wiped everything, so no logs... The only way to have it booting is to install EndeavourOS using the offline installer, which is using kernel 6.4.8. There is an option to install the LTS kernel alongside. So the system is booting with 6.4.8, but after updating, neither the new 6.4.12, or the LTS, which is 6.2, doesn't boot. I haven't tried booting with the LTS kernel before updating, to see if the same kernel is working before and after or not. I will try to reinstall it using the offline installer and then try to gather some logs after updating.
I found it!
[liveuser@eos-2023.08.05 ~]$ cat /mnt/efi/loader/entries/02ef85f9edc146d598502c1b296ff64a-6.4.12-arch1-1.conf
# Boot Loader Specification type#1 entry
# File created by /etc/kernel/install.d/90-loaderentry.install (systemd 254.1-1-arch)
title EndeavourOS
version 6.4.12-arch1-1
machine-id 02ef85f9edc146d598502c1b296ff64a
sort-key endeavouros-6.4.12-arch1-1
options nvme_load=YES nowatchdog rw root=UUID=9ae3c50f-be08-4594-ac30-2d094375868d systemd.machine_id=02ef85f9edc146d598502c1b296ff64a
linux /02ef85f9edc146d598502c1b296ff64a/6.4.12-arch1-1/linux
initrd /02ef85f9edc146d598502c1b296ff64a/6.4.12-arch1-1/initrd
I'm on systemd-boot. Where isn't a directory loaders under loader, but I found the parameters under /etc/kernel/cmdline:
nvme_load=YES nowatchdog rw root=UUID=9ae3c50f-be08-4594-ac30-2d094375868d
[root@EndeavourOS /]# blkid
/dev/nvme0n1p1: UUID="6903-7FA3" BLOCK_SIZE="512" TYPE="vfat" PARTUUID="86a0a714-815f-45db-ad0e-9eba16861903"
/dev/nvme0n1p2: LABEL="endeavouros" UUID="9ae3c50f-be08-4594-ac30-2d094375868d" BLOCK_SIZE="4096" TYPE="ext4" PARTLABEL="endeavouros" PARTUUID="9b52162c-a4bf-4e5e-8096-bb7f144c481a"
/dev/loop0: BLOCK_SIZE="1048576" TYPE="squashfs"
/dev/sda2: SEC_TYPE="msdos" LABEL_FATBOOT="ARCHISO_EFI" LABEL="ARCHISO_EFI" UUID="6121-B369" BLOCK_SIZE="512" TYPE="vfat" PARTUUID="1bdb3cc0-02"
/dev/sda1: BLOCK_SIZE="2048" UUID="2023-08-05-13-57-43-00" LABEL="EOS_202308" TYPE="iso9660" PARTUUID="1bdb3cc0-01"
[root@EndeavourOS /]# sudo cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a device; this may
# be used with UUID= as a more robust way to name devices that works even if
# disks are added and removed. See fstab(5).
#
#
UUID=6903-7FA3 /efi vfat defaults,noatime 0 2
UUID=9ae3c50f-be08-4594-ac30-2d094375868d / ext4 defaults,noatime 0 1
tmpfs /tmp tmpfs defaults,noatime,mode=1777 0
SOLUTION BELOW
----------------------------- I have never been in a more confusing situation regarding Linux.
I have a Dell XPS 15 9560, which had a dual boot Windows 10 / EndeavourOS setup. It was running fine for months. 10 days ago I updated Linux and after restart it couldn't boot anymore. It got stuck at "A start job is running for /dev/disk/by-uuid/..." (which is the root partition).
First, with the help of a friend of mine who is quite knowledgeable about Linux (he runs vanilla Arch, etc), we spent 5 hours trying to fix it but had no luck.
Then I decided to back up everything and do a fresh install. Aaaand the same error happened again on the first boot. Then I though "ok, probably some problem with Arch, lets try Fedora". Nope. Some similar error about not finding the root partition. (Here I must say that the kernel which was shipped with the ISO was working fine, but after updating to the latest one, it failed.) Here I thought "ok, then it might be a problem with the latest kernel, let's install EndeavourOS with the LTS kernel." Nope, LTS kernel also didn't boot. Then I tried Ubuntu and it worked, but that's not solving the problem. Then I decided to put another nvme drive in the laptop and try there. The same error again.
Now the greatest part: If I put the nvme drive into an external usb case, EndeavourOS installs, updates, boots without any problem, no sign of the error.
So now I don't know how to proceed... Maybe there is something wrong with the pcie port in my laptop, but except for the booting problem, windows is working, I can also mount and access every partition in the ssd through a live usb. So no other signs of problem with the port whatsoever.
I would be grateful for any advice as I've lost several days trying to solve this and I am out of ideas...
----------------------------
Solution:
The last working kernels are from 11. August 2023 (both linux and linux-lts)
linux-6.4.10.arch1-1 and
linux-lts-6.1.45-1.
You can download them from here: linux / linux-lts
and install them with
sudo pacman -U the_path_to_the_package
Thank you all for the help!
When I view this community through lemmy.world, there are 2 posts (mine and one more). But when I view it through lemmy.sdf.org, only my post is visible. I don't understand why is this happening.
I started subscribing to some communities and noticed that for example I can't find !bulgariaeu@lemmy.world from here. Why is that?