It depends a bit why you want to do this, and maybe also how complex the equations will be, but I would probably do this in puredata. The added advantage is you can tweak it live. If you're into experimental audio, learning puredata is definitely a plus.

This should give you a rough idea whether it's a good tool for your purpose. http://www.pd-tutorial.com/english/ch03s05.html

Are you fermenting under pressure? If so your final gravity will be off by quite a bit using a gyro based meter. The absorbed co2 will give you a false reading. I use mine more to determine when fermentation has stopped and I can bottle. Maybe take a sample and measure with a normal hydrometer and see if your reading is correct.

This is pretty cool! Might test it out at some point. Thanks for the write up.

I did not verify my thoughts but I think this could be because ovh has big datacenters in Germany and quite a lot of Europeans use ovh.

It's honestly a really well designed project. The engine and gui can run independently of each other so you can run the engine headless and interface with it via osc. This is what I do and works very well. The midi sync is very good and remains sync for days on end if your jack is stable. I make music with a friend who runs ableton and we both do live looping with a shared clock and never run into problems. Anyway, give it a spin!

Not sure you can get it to run on Android, but sooperlooper is a very good and stable open source looper. I've built a quite elaborate setup around two instances and puredata and it rarely fails. Can highly recommend!

https://sonosaurus.com/sooperlooper/

Quite a good follow up talk posted not so long ago.

https://www.youtube.com/watch?v=rimtaSgGz_4