DIY - Pico Pad with choc switches and rotary encoders
DIY - Pico Pad with choc switches and rotary encoders
Build guide and files on Printables for those that are interested. Running KMK firmware.
You're viewing a single thread.
What's KMK and what's the advantage of it over QMK?
KMK is similar to QMK but it runs on python, and it being python means that nothing needs to be recompiled for it to apply your changes. The pico has circuit python running on it which acts as a removable usb drive that contain your config files. With any device that you can use to read a flash drive you can reconfigure your layers/keys with. It's quite flexible to use. Open up notepad/vim and click save, the board reboots with your changes.
Oh that's pretty nifty. I assume it's not used as much because it's more expensive to implement?
Everything about it is open source, the only limitation is microcontrollers that support circuitpython. Most of the controllers that work with QMK also work with KMK. The pi pico for example that's used is much cheaper than the typical arduino pro mini, and comes with more storage and i/o pins.
I see. I guess it's a mindshare thing then, I myself only heard of KMK from your project!