The relevant part of NAT is actually just those 20 lines.
The hardest part is actually the UI :P The difficulty in building nice UI comes from potential ports listening on the local WAN interface (for example if the machine is also running any HTTP or SSH servers). I'd like the user to see at a glance what ports are used for what (port used by a local service - what service is that?, ephemeral port redirection using the full cone nat table - where is it redirected?, any symmetric nat connections together with their last activity / timeouts / traffic summary). Ideally the same interface should also allow the user to create new redirects.
Unfortunately explicit, stable port redirections is something that is still missing. I'll have to implemnt them (with a proper UI) eventually because under the hood they are also a necessary building block for other features. At the moment there are only "ephemeral" port redirects which may be sufficient for you. They are created automatically when a LAN machine sends out a packet from some source port. That port is then implicitly forwarded back to that machine. This is actually a part of the "Full Cone NAT" thing.
This can be triggered manually for example with something like:
nc -p 80 1.2.3.4 1234 # send a dummy TCP packet from port 80
Ephemeral port redirections don't expire but can be taken over if another LAN host also uses the same source port for outgoing traffic. This may happen randomly because source ports are usually picked at random by the OS. Generally ports below ~32k should be fairly stable because Linux doesn't use those by default (I don't know about Windows). Redirecting ports below 1024 should be even more stable because they're reserved for specific well-known services.
Ah, I've found the issue. The ampersand character in the title was escaped to HTML entity (&), which bumped the title length above the limit. I noticed this after posting the shorter title & trying to change it back.
I think I've found the issue. So I've found out that Lemmy has a 200 character limit for titles. My post had 198 characters:
Iβve just released Gatekeeper 1.6.0. Itβs a single executable that turns any Linux machine into a home gateway. Now with realtime traffic graphs, LAN autoconfiguration, full cone NAT & better looks.
Removing the word "just" at the beginning brought the total character count to "193":
Iβve released Gatekeeper 1.6.0. Itβs a single executable that turns any Linux machine into a home gateway. Now with realtime traffic graphs, LAN autoconfiguration, full cone NAT & better looks.
And the post got created successfully :)
I think something might have prevented lemmy.world from accepting the 198-character title but worked with 193-character one. This doesn't happen on my home instance, running lemmy 0.18.1 but happens on @lemmy.world, running 0.18.5.
DHCP & DNS server optimized for home gateways. Contribute to mafik/gatekeeper development by creating an account on GitHub.
Hi all home network administrators :) Haven't posted anything here since June, when I told you about Gatekeeper 1.1.0. Back then it was a pretty bare-bones (and maybe slightly buggy) DNS + DHCP server with a web UI with a list of LAN clients. Back at 1.1.0 Gatekeeper didn't even configure your LAN interface or set up NAT rules. It used to be something like dnsmasq - but with a web UI.
I've been improving it for the past couple of months - simplified it a lot, fixed bugs, optimized internals, improved the looks & added a bunch of quality-of-life features. Now it's a program that turns any linux machine into a home internet gateway. It's closer to OpenWRT in single executable file.
One big thing that happend was that I've attempted to replace the ubiquitous nft-based NAT (where the kernel processes the packets according to a rule-based script) with nfqueue (where the kernel sends the packet to userspace so that it can be altered arbitrarily). I've expected this to be buggy & slow. Well, it was hell to implement but it turns out that it's not slow at all. On the debug build my router can push 60GiB+ / second over TCP (over virtualized ethernet of course). And I'm not even using any io_uring magic yet. Quite honestly I don't even know how to explain it since it's slightly above the peak DDR4 transfer rate (I'm running dual channel DDR4-3200). Maybe the pages are not flushed to RAM & are only exchanged through CPU caches? Anyway I'm pretty excited because userspace access to all traffic opens a lot of new possibilities...
The first thing is NAT. By default Linux only supports symmetric NAT, which is pretty secure but is also fairly hard for the peer-to-peer protocols to pierce. There are some patches that make Linux full-cone but they're not, and are not expected to become a part of the mainline kernel (at least according to OpenWRT forums). Now, since we have access to every packet we can take care of this ourselves. We can create a couple hash tables to track connections, alter the source & destination IP, recomputing the checksums if necessary. Suddenly we can have full-cone NAT, on any linux machine, without patching the kernel! At runtime it's not as configurable as netfilter + conntrack but it's a whole lot simpler - since now we can use a general purpose programming language rather than netfilter rules.
Another cool feature that we can now have are truly realtime traffic graphs. Summary of each packet traversing the network boundary is immediately streamed to the connected web UIs over WebSocket. This is way faster than the alternatives based on reading some /proc/ or /sys/ files every couple of seconds. Gatekeeper also aggregates the traffic from the last 24 hours between each pair of hosts into a histogram with 100ms resolution and allow clients to view it, scroll through it, compute stats, download as JSON or CSV. You can retroactively check which device talked with what IP, at what time with unprecedented resolution.
My next step is going to be capturing the traffic that goes through into a 5MB circular buffer (separate buffer for each LAN client) & downloading it as Wireshark-compatible pcap files. Computationally it's almost free. IoT devices usually don't transmit a lot of data. 5MB may actually cover months of traffic for the simpler ones. If any device is did anything weird, it will finally be possible to investigate it - even after it already happened.
Long-term Gatekeeper could do even more. For example offer assistance in setting up TLS MITM, perform some online grouping / analysis on the live traffic.
I still have some ground work to do - like automatically setting up Wireless LAN, bridgidng multiple interfaces into a single one and I think there may be a bug that causes crashes when checking GitHub for updates. But I wanted to share it sooner rather than later. I hope that despite its imperfections some of you will find it useful!
(I've had some issues with cross-instance posting. This is attempt #6)
Hi lemmy.world folks,
I'm having an issue creating a new post in !selfhosted@lemmy.world.
- Cross-instance posting from my home instance (https://szmer.info) only creates a post in my home instance's view of @lemmy.world. After 10 hours the post still doesn't appear on @lemmy.world.
- I've created a local (@lemmy.world) account and tried again - but then the Submit button spins forever. The post doesn't appear in the community.
- Using the "Photon" UI I get an error pop-up saying simply "couldnt_create_post".
To the best of my knowledge I'm not banned.
Do you know what coud be going on and how could I regain my ability to post?
πππ @lemmy.world My main account is @maf@szmer.info. I've had some cross-instance posting issues and created this account as a workaround.