How To Replace Smart Phone Battery in 2014, They Used to be So Easy

That... doesn't look easy. Or at least, I imagine this video would look intimidating to non-tech savvy users. I consider myself at least a little tech savvy and I'm like 80% sure I would forget to insert that transparent sheet thingy under the battery. I'm guessing it's insulation?

Anyway, what used to be the norm was pulling off the back cover and then remove the battery with your fingernail. No tools required. Now a vast majority of phones are glued together, all under the pretext of making the phone more thin.

What irks me is that companies still make removable batteries, but they are getting harder and harder to find. In fact, Samsung itself has XCover line of phones that have easily accessible batteries. How easy? This easy:

https://www.youtube.com/watch?v=Zb7N60P51q4

(Actual battery removal at around 0:11)

Here is an alternative Piped link(s):

https://www.piped.video/watch?v=Zb7N60P51q4

Piped is a privacy-respecting open-source alternative frontend to YouTube.

I'm open-source; check me out at GitHub.

Repaired phones for years for friends family and for payment sometimes. Still managed to mess up my own screen replacement a week back, a bit to much pressure on one side...

Worst thing besides the right to repair adversely and planned obsolescence is the bloody prices. Folded and got a new from a second hand company ( still new in box)

they should honestly not need all of that, batteries are consumable and should be removable goddamit!!

I mean they're still this "easy" for the most part. Obviously some are harder than others but I've changed plenty of post 2020 phones and they're very similar to this. I would strongly argue that it should absolutely be waaaaay easier to do tho. I've only changed so many because it's too difficult for most people and they know I can.

It's ridiculous how hard they've made these damn things to repair and it pisses me off that it's even legal. We're slooooowly making headway in the right to repair department but it's really just kind of clawing back to where we were than actual progress.

I've been fixing cell phones and replacing batteries for literally 25 years now.

On all the higher end phones that people like to have, it is absolutely not nearly that easy anymore. Not even close. The most time consuming part is if they're waterproofed/resistant and glass backed. You have to be much more careful taking the backs off without breaking (much easier with a heat gun or heating plate) and then you have to remove every little bit of the adhesive used on the back and housing of the phone if you want to seal it up well, again.

Then theres often a lot more hardware you have to disconnect and remove in order to get to the battery.

Then many batteries (looking at you, samsung) adhere the batteries down extremely hard with no release tabs so you need to use adhesive removal and thin plastic to slip under the battery (use too much or pry too hard and you'll ruin the screen) in order to remove it.

Then, if you've done all that, you just have to decide if you're going to put the phone back, back on with a sticker like what it came with (aftermarket ones aren't very good, though) or if you can lay down a nice enough bead of something like t-8000 glue. I go for the glue, because I've done it enough times that I'm confident I can make it waterproof again and I have stuff to hold pressure across the phones while it dries.
- This is such a bummer to hear. That makes sense because I have definitely not been working on high end phones. I've only worked on one where I needed to remove the back glass (which was a bitch until I figured it out!) but once I popped it open it wasn't too bad. Sounds like things are getting worse and maybe won't get better for a bit...
  
  I'm curious, do you ever see any type of DRM or software locks if you replace any components? I'm just a weekend warrior so I don't work on a ton but I've tried to help out a friend or two by replacing components and there's been a few times it seems like everything is in place but the phone just won't allow the replaced components. I just assumed I messed something up but I've heard of some fishy business where phones won't allow aftermarket components on some parts of the phone (I've mainly only had this issue dealing with switching out camera components)
Most "high-end cellphones" have their batteries glued in (applying heat near a battery is no fun at all), and in some cases to open the enclosure you've got to remove the front glass as there's no way to remove the back cover (surprise, it's also glass).

Honestly, I felt that after trying to replace a battery, they should hand me an EOD title.
- Is it glued in though? Using a little acetone works well.

I am waiting for our future dystopia where the police are alarmed automatically when someone tries to remove their phone battery

It's kind of ironic that changing the battery of cell phones were so easy back then and so hard now and finding a battery saw/grinder/any-electric-tool was so hard then and so easy now.

Two hardest parts for me, when trying to do digitizer/battery replacements have been:

getting the ribbon cables sorted/plugged back into the right spot between the digitizer and the main board.
the double sided tape used to keep the battery from sliding around can be a bear to remove and replace.

Honorable mention to just getting the digitizer pulled up enough with suction cups to get a pry tool in to finish the job.

Here is an alternative Piped link(s):

https://piped.video/2L9NXKlQbrg

Piped is a privacy-respecting open-source alternative frontend to YouTube.

I'm open-source; check me out at GitHub.