Windex to clean, let it dry for a bit, then a layer of gluestick has always worked for me, as long as the bed heats to 60°C for printing. The z offset has to be a bit different for PETG than PLA, which can be a bit tricky. I think (been a whole since I've printed PETG) it had to be a bit higher than PLA, so it wouldn't "squish" as much as PLA. Seemed a bit counterintuitive, but it solved most of my problems
I'd agree with router before a drill press, miter saw, bandsaw, and a jointer. However, for simple furniture projects, I'd argue a planer is the second most important tool behind a table saw. You can use a planer with a sled for face jointing, and a table saw sled for edge jointing. Yes, you need a router for edge profiles, but not for dead simple tables and cabinets.
Exceptionally versatile tool, and necessary to take you to the next level, but not more important than a planer.
A router is at the top of my list for "nice to have, adds a lot of value, but not absolutely necessary for basic projects" tools. I still don't have a router table after 6 years, just a Makita plunge router that I got for $100. Great tool, but not 100% necessary if you're just trying to make basic tables and such.
People will complain about any number of tools. "THIS GUY HAS $10K IN TOOLS, MINIMUM, NO ONE CAN DO THIS PROJECT WITHOUT ALL THOSE TOOLS!!!1!"
Ignoring the fact that while that particular shop has expensive tools, nobody (sane) goes out and drops all that money at once. Most woodworking projects only need a table saw, a planer, a cordless drill, an orbital sander, glue, sandpaper and finish.
All of the tools can be found cheap on Facebook marketplace, Craigslist, OfferUp, yard sales, or estate sales/auctions.
-
Table saw: I ran with a DeWalt job site saw for years before my wife talked me into getting a saw stop. $350 new, or ~$100 used. You can also find used contractor saws for $300 on a regular basis on the aforementioned platforms.
-
Planer: I used a shitty lunchbox planer for years that I saved from a dumpster with some 3D printed gears that I designed. I bought a used tank of a planer (still only 12", but 230V and weighs about two of me) for $200. You don't need a jointer. Make a jointer sled for your planer and a jointer sled for your table saw. Takes longer, but I still used the planer sled for boards that don't fit on my jointer.
-
Cordless drill: Ryobi has a drill and driver combo for around $100, or get a DeWalt for $60. Or scrape the bottom of the barrel for Harbor Freight that'll get you by for a bit for $20
-
Random orbit sander: I used a $14 one from Walmart for years until my hands started hurting after using it. $100 for a new Makita one, can be found for $50 or less used.
-
Sandpaper: $12 for a massive pack on Amazon
-
Glue: $10 for a medium sized bottle of Titebond II
-
Drill bits: $5 at harbor freight
Woodworking isn't a cheap hobby, but you can get into it with used tools and some restoration work. People love to nitpick shit, and it gets old seeing the same defeatist mentality of people talking themselves out of even trying it.
Space is the only thing you need, but even then, I started on a 5'x5' apartment balcony in Florida, and used an uninsulated, unpowered 9'x16' shed in Alaska for several years.
Definitely earned it this year. I've never been happier to be wrong about a player
Dak's "here we gooooooo" and weird little horse step is so stupid
I just don't give a fuck about it this clown or his little circus. I don't care. Let him sit in his stupid little corner and jerk himself off, just stop trying to force his every move into the spotlight.
Lol fair. I wore my XtraTufs on a flight and got some real weird looks in LAX on my layover
No problem! They worked great for me for a few years in Alaska, highly recommend them for snow or wet areas. They make insulated ones, but I never had an issue with the uninsulated ones if I doubled up on socks.
You will, however, get some weird looks if you wear them in an airport outside of the PNW
I call it "don't live in a place where the air hurts my face"
But actually, XtraTuf boots are great.
The NFL is rigging the game to make the Colts lose in order to protect local MILFS. CMV
How tf is that illegal contact? Cooper just stiffarmed the defender into the dirt with his facemask
Patriot's defense is solid. Ours is average at best, and Fangio put Kader Kohou on Diggs instead of playing slot corner where he's good. Allen is overrated and a big ole crybaby removed that whines for a flag every time a defender comes within 5 yards of him
Hustle culture, sure. Side hustles, sure. The concept that a game company should pay me to play their game, nope.
Flop much Herbert?
Basically title. It would be nice to have team flairs, if it's possible here
Talk some shit. Fuck the Jets, Cowboys are gonna miss the playoffs, Tua for MVP, Jordan Love is better than Aaron Rodgers at this point, Josh Allen is overrated, Mac Jones sucks, Jared Goff is great, Dan Campbell is the man, etc etc
Not sure why I can't upload multiple images, but there's another one just like this. Added some transtint dye to two coats of shellac, then two coats of poly, sprayed on with an HVLP gun. In hindsight, there are a few changes I would make to my design to make them easier to build, but I'm happy overall (and so is my wife)
Any plans to make a game thread similar to r/nfl?
Here's one for the HoF game, bit late. Fuck the Jets
Had my first dogfight a few days ago. I was scouting in a Cutty Black for my friend when he went to sell some illegal cargo on Daymar, and spotted a Hull A heading to the sell point. Naturally, I launched a bunch of missiles and finished him off with lasers.
My buddy jumped in, sold his cargo, and I started to head back to ArcCorp to do my own thing. After I finished my first jump, he told me someone was attacking him in a Warden (I think), so I turned around. My buddy had already launched a bunch of missiles and was trying to escape. I fired another 8 missiles, charged in guns blazing, and blew the guy up. Turns out it was the same guy coming back for revenge.
Very fun encounter, and the guy was a good sport about it. Ended up getting a decent chunk of cargo off the Hull A and had a great time. I've been running cargo in my Cutty or a rented Connie, or ROC mining for the last couple weeks, so this was a fun change of pace
I've been using a crappy random orbit sander from Walmart for the past 5 years. It works well enough, but as I've gotten a bit older, had a few more non-woodworking related injuries, etc, the excessive vibration is really starting to get to me. I know Festool is the gold standard in terms of dust control and likely vibration, but are there any other good options that aren't $500-600?
I'm sitting here after sanding for an hour and a half or so and my hand is still tingling after 20 minutes. Clearly, I need to get a better sander, but I can't justify spending $575 on a Festool sander right now. $50-150 would be more palatable, as long as it is a clear upgrade from my current setup.
Edit:Ended up getting this Makita sander . Huge upgrade, thanks for the suggestions!
What's the best way to build up aUEC in 3.19? I've played this game a bit, touch and go for a year or so. Is bounty hunting still the way to go? Bunker missions? Mining? Something else?
I've mainly been doing bounties and bunker missions with some friends to pay for my ship upgrades for the third time, but only spent a couple hours so I'm not too invested in any one path
Miami Dolphins quarterback Tua Tagovailoa threw a league-high 1,664 passing yards on vertical routes in 2022.
Couldn't upload multiple images, but used walnut with maple splines. First time using splines, very happy with how it turned out