Some YouTube creators are doing this right now. AI generated translations with the creator's voice. Looking at it from simply a nerds's perspective, it's fucking neato
I’ve been trying actual page numbers since those are what matched up at first
Edit: I haven’t extensively gone through it all yet. Are they mixed between page numbers and pdf page numbers?
I’ve been skimming through the listed page numbers so maybe I missed it but where in pg 545-581 does it talk about “[ending] marriage equality”? That whole section seems to be talking about the FBI and DOJ
As soon as they fix the framerate of PWAs on mobile and add vertical tabs on desktop (they are working on this one; pretty excited), I'll switch back immediately.
Does Cromite have support for auto-filling from 3rd party password managers? When I last used Bromite, it couldn't so I never ended up using it as my main browser
I disagree. The 20-30% interest a lot of credit cards have is enough of a reason to pay on time.
I've seen some youtubers recommend OnShape. It's a browser based CAD app so it should work fine.
I know you didn't ask but just in case you (or anyone reading this) don't know about it; Good Lock from the Samsung store. Once downloaded, you can create a routine in the settings app to reconfigure the bixby/power button to do whatever you want
This just in, Google will he deprecating their phone app fart button in 18 months for the new and improved Android Poots button.
Wait, we're just now getting word that in 7 more months, Android Poots will be replaced with Google Toots. All 3 buttons will be active at the same time while Google works on feature parity.
You'll never believe this, insiders are telling us that 4 months after Google Toots, Google will be introducing Google Farts to replace Google Toots. Google Farts will be different than the original Fart button, not sure how but we are expecting it'll be a worse experience.
And finally, 6 months later, after hundreds of millions of dollars spent, somehow none on marketing, and after generating a healthy user base that defied all odds, Google will begin to shutdown all 4 buttons and lay off all the teams that worked on them.
I always forget. Can we do a release upgrade to this or do we have to wait until 24.04.1?
Edit: Nvm. You can update today
sudo do-release-upgrade
They should have cast Randall Park as Mr. Fantastic. Lean real hard into the multiverse 
Garbage show. SNW better. Remove my comment again, bitch. Borg behavior
Discovery walked so Strange New Worlds could run and I will always be grateful. But the last few seasons of Discovery have been trash
I’d like it if Arch had a “ready to go” iso I could download that would get me a working desktop with sane defaults and BTRFS or ZFS auto snapshots installed and enabled. Configuring it was fun the first few times. Now it’s a chore
Be careful with linseed oil, the rags/paper towels you use to rub the oil on can spontaneously combust hours after you’ve thrown them away. Dispose of them properly and you’ll be fine.
I don’t mean this to sound insulting but for regular people, the VR headsets of the last 10 years have been toys. You couldn’t really do work on them due to the low res screens. It wasn’t until recently that the screens have gotten decent enough to actually use for work. (Vision Pro, Bigscreen VR, others I’m not aware of)
Yes, you can still socialize with people irl but it’s not the same. It’s not the same as being able to sit down next to someone you care about, watch a show they were already watching, and share an experience with them. It’s very much a 1 experience per person per headset sort of thing. I’m not saying this is bad, more of just an observation/opinion
So from what I can tell, the Vision Pro is like strapping an iPad to your face. Yes you can still do work on it but it can’t replace a Mac (yet) and it only allows you to make one virtual screen per paired Mac. If it could make more virtual screens, I could accept the Vision Pro more than I do now. At the moment, a Mac or PC and 2 or 3 monitors seems like the better buy
I don’t have a problem with VR gaming, but this is Apple, almost none of the games people want to play support Apple hardware. So I see the Vision Pro as being way too expensive if you just intend to play games on it.
I don’t really have an issue with anything ND you said regarding children and VR. I understand why kids want VR because, with current tech, it still seems like a toy. I want to know what adults are doing with these things. More specifically, I want to know what adults whom are similar to me, are doing with these headsets.
I think you focused a little too much on when I said “healthy adult”. I didn’t mean to say VR is unhealthy, I just meant that I understand why people with disabilities would have more use for these than healthy people.
My opinion on the Vision Pro is that, in its current form, it’s really limiting for $3500. The tech is really cool, don’t get me wrong, I can see some uses for it, but atm, it still seems like an expensive experience you can’t share with others irl. Long term, I’m bullish on AR/VR, but for now, the compromises are off putting
- How long can you comfortably wear it?
To be honest though, I’m more interested in the type of person who wants one. I’m not judging, I just don’t understand why a healthy* adult would want one in it’s current state.
- What are you going to be doing with it? Work? Consuming content? Etc.
- This might be too personal but, are you single? do you have a partner? Kids? If you live with literally anyone else, how do you feel the dynamics will change, if at all, when you throw a Vision Pro into the mix?
*if someone has a disability, yeah, VR and AR might really help them out in their day to day activities, especially with the eye tracking tech it has. Even being able to see environments that they might not normally get to experience in real life would probably be pretty novel
I've been interested in building a DIY NAS out of an SBC for a while now. Not as my main NAS but as a backup I can store offsite at a friend or relative's house. I know any old x86 box will probably do better, this project is just for the fun of it.
The Orange Pi 5 looks pretty decent with its RK3588 chip and M.2 PCIe 3.0 x4 connector. I've seen some adapters that can turn that M.2 slot into a few SATA ports or even a full x16 slot which might let me use an HBA.
Anyway, my question is, assuming the CPU isn't a bottle neck, how do I figure out what kind of throughput this setup could theoretically give me?
After a few google searches:
- PCIe Gen 3 x4 should give me 4 GB/s throughput
- that M.2 to SATA adapter claims 6
GB/sGb/s throughput - a single 7200rpm hard drive should give about 80-160MB/s throughput
My guess is that ultimately, I'm limited by that 4GB/s throughput on the PCIe Gen 3 x4 slot but since I'm using hard drives, I'd never get close to saturating that bandwidth. Even if I was using 4 hard drives in a RAID 0 config (which I wouldn't do), I still wouldn't come close. Am I understanding that correctly; is it really that simple?
PSA
After updating to TvOS 17, my Sonos Beam sound bar started making weird crackling sounds and music sounded tinny. Turns out, I had to change the audio format in the Apple TV settings from Stereo to Dolby Digital 5.1 for the issue to be fixed.
Not sure what I had that setting set to before but I’m leaning toward the idea that the update reset the audio format back to default settings. If you are having sound issues after updating, that might be the issue.
My garmin has it set up like this:
Z1 = 50-60% Z2 = 60-70% Z3 = 70-80% Z4 = 80-90% Z5 = 90%+
As of right now, I’m seeing my Z3 improve but improving Z2 is going to take me a while. I can have a conversation in Z3 using the Garmin percentages.
I’ve also seen other forums/websites have different percentages. Ex.
Z1 = 68-73% Z2 = 73-80% Z3 = 80-87% Z4 = 87-93% Z5 = 93%+
If I used this method, then my Z2 is the one that has been improving this whole time. This one ‘feels’ right to me when I’m running but I’ve only been running for a few months at this point (was running last year but got sick a few times and had to basically start all over) so maybe I just need to stick to it and the garmin method will start to make more sense.
So I was just curious how everyone has their percentages set up. What do you all actually train at?
> a_fancy_kiwi
I occasionally find myself reinstalling home assistant and every time I do, I get stuck on two steps because I forgot the commands and didn't write them down from the last time. I'm writing them below mainly for myself but also for anyone else who may get stuck. For future reference, I'm using Ubuntu 23.04 with Virt-Manager.
Before you begin the installation of the provided qcow2 image, you might want to resize that image from 32G to whatever size you want. ex:
qemu-img resize haos_ova-10.3.qcow2 +68G
Next, you might want to make a network bridge device. Navigate to your netplan folder and backup the yaml file that's in there (your file may be named differently)
cd /etc/netplan
cp ./01-network-manager-all.yaml ./01-network-manager-all.yaml.old
Edit the yaml config.
nano ./01-network-manager-all.yaml
Change the renderer to networkd and add the bridge device (br0). Your ethernet device may not be named enp12s0, make sure to use your ethernet device name. If you are on wifi, look up a netplan wifi config and make adjustments as needed.
network: renderer: networkd ethernets: enp12s0: dhcp4: true version: 2 bridges: br0: dhcp4: yes interfaces: - enp12s0 parameters: stp: true
save the file. generate and apply the new netplan. WARNING - If you are hosting this on your own network, it's possible the Ubuntu host IP could change. If you were doing these steps over SSH, you might need to find the new IP and reconnect. Static IPs can be set in the netplan config but I usually just do it from my router settings afterwards which is probably why the IP changed.
netplan generate
netplan apply
Now just go through the installation process and when you select your network device, make sure you select "Bridge Device" and the device name is "br0"
Edit 12/15/23 - well, I rebuilt my server again. I used regular Ubuntu desktop this time and I for the life of me I couldn’t get networking to function properly. I ended up buying an Ethernet card and passed it through to the VM