Umm, I’d like to see statistics or data on that. Sounds more like an opinion.
The point of one child was not to decline the population, but to level it off, to help with resources. They left it in place waaaaaay too long and have reached a point where reversing it will be a Herculean effort.
I get that… but it’s kinda like China with the one child law…. No one said “hey, eventually this will make our population decline.”? It’s mind bottling that none of them thinks further than the next yacht.
So, what’s the end goal? Are they trying to make “Idiocracy” a documentary? What happens when the US public no longer has the understanding or knowledge of basic science? Who will invent and innovate? Who will advance technology? Technology that all these people enjoy every day. That they stand on top of to try and control the public. That they are using to make people dumber. How short sighted are these people?
So, we are repurposing parts of string theory? These “shells” are postulated in string theory if I remember my Brian Greene… I agree with his view on dark matter, it’s starting to become more than just a placeholder.
Thank you, sorry, this whole thing is just so mind bottling
I don’t know, they were clearly endangering everyone’s life in that stadium by running across it like that in the middle of a game. He is a super hero saving all those lives. /s in case it wasn’t obvious…
Even rent-a-cops are bastards.
Ooo yea, like their cars are fully self driving? So there will be thousands of people in robot outfits dancing in factories? If you believe anything this man says you are a bigger rube than him.
Wasting clock cycles on this dribble…
“You need at least sixteen pigs to finish the job in one sitting, so be wary of any man who keeps a pig farm.”
His base won’t care, but we should. Ever conversation about that shit stain should include “oh you mean that guy that flew to Epstein’s island a whole lot, and had his name obfuscated on flight logs to hide his identity because he knew what he was doing was illegal and wrong?”
Great show
“WHY DO THEY ALWAYS SEND THE POOOOOR”
Just my opinions here:
-
I have essential services running on a separate computer, 8gb pi4 right now. Stuff like NetBoot.xyz, homepage, etc, lightweight and resource low but need to be always up. That way if your main server needs to go down, you still have those services running.
-
I have bought second hand enterprise equipment for most of the hardware I have. Basically anything with ddr4 and pcie 3 or above will crush most things you would like to do. Grabbing an intel with quick sync will help with Jellyfin, but you can add a graphics card for transcoding if you want, a quadro p2000 or higher will be fine. Building is a viable option as well, but you may spend more for less powerful but more efficient hardware.
-
software is probably the most controversial. I went with proxmox on my main server, giving me the ability to run whatever I want whenever I want. It’s not perfect, but gets the job done and has helped me learn A LOT. But flip a coin or roll a dice on what software to run as a newbie, it will all be a learning curve, and everyone will tell you why what they use is superior.
Whatever you do, you’re not wrong. Run things that tickle your fancy and move at your pace. You’ll mess up, step back and punt a lot. Remember to backup essential data before you wipe. Have fun, and good luck on your travels.
He is more of a liability than an asset at this point.
“Mind bottling. You know, when things are so crazy it gets your thoughts all trapped, like in a bottle”
Starting a civil war to stay out of jail… what a baby
Setting up my server as a newbie some years ago, I did not have the ability to purchase more then one 8TB hard drive. Outgrew that rather quick and now I have two additional 16TB drives, in a Just A Bunch Of Disk configuration, mounted to different /mnt mount points. I know this is not ideal, but lacking the ability to expand further or buy new drives for a new zfs pool and transfer, I don't have much of a choice but to wipe the drives, set up a zfs raid and re-download everything.
I have everything set up in docker-compose files, so I'm pretty sure I just need to keep those and the folders where the configs are, modify the compose files with the new file structure and... I am unsure where to go from here. Will everything start being grabbed as soon as my dockers spin up? Is there an additional procedure I need to do to make sure I don't wipe my existing config files with blank empty ones? Is there an easier way of doing this?
I have an 8gb Raspberry Pi 4 that has been a workhorse for years. I keep it for my not intense but essential networking purposes, NetBoot.xyz, Homepage, etc., because I can run it over PoE (edit: Power over Ethernet), so it is always on as long as my network is up.
It is growing long in the tooth, and I find myself wanting to replace it with something a bit more capable. Looking at the 8gb Pi 5 at $80 plus another $30 for a PoE hat, I wonder if there is something out there that would be a better value for running PoE? Can you convert a micro pc over to PoE? Does anyone have any recommendations for computers that run off PoE or can be converted to PoE?
I am trying to set up a repository of knowledge for my job. Was thinking a wiki, but I need something that I can make as simple as possible for the end user, as some of them are not familiar with markdown or html. Is there a self hosted option that is dumb easy simple to navigate and edit for the end user?
I have this image in my head I can’t quite pull what musical it is from. It’s a 1950-60s western, in color, a woman is walking around a ranch singing about how everything would be different and everyone would treat her differently if she were a man. She was just talked over by her dad or older brother. May not have been a western, but I distinctly remember her on or near a fence post during the number. I do not remember any particular face or name attached to this film. Anyone have any ideas of what movie this was?
I am currently looking into upgrading storage for my homelab. The two routes I am looking at are grabbing a dell r730 or a disk array. They are both about the same price, but my major purchase concern is heat and noise. My office/homelab is in a 10x10 foot room. I have worked hard to get the sound floor at my desk to be around 44dB, and the temps to top off at 79f, 74 on a good day with the door open. Is a disk array going to add more heat and noise to the room than a dell r730 server running proxmox with trunas?
About a year go I bought one of those fanless four port routers. Ordered one with a celeron, they sent me one with an 11th gen i3. Since then, core temps will regularly spike to 100c and it will throttle. Took it apart and found this as a cooling solution, which I’m sure would work fine with a celeron, but they gave me an i3 1115g4, with a base frequency of 3.1ghz, which can’t dump heat into this aluminum slug fast enough. The bios does not let me lower the clocks, or save power anywhere else. My only solution to make this work is to improve the cooling solution.
Would love to do a tower cooler, but can’t find any place that produces one that will fit my mounting holes. Been looking at laptop solutions as well, but again I am running into bracket and mounting problems. Nothing shows dimensions so I don’t waste time and money on solutions that don’t fit.
I have found copper shims, ranging from .3mm to 1.5mm thickness in a 20mmx20mm form. The aluminum slug they used is 45x25x2.73. If I stack these shims with thermal compound in between, would I get better thermal conductivity than just the aluminum slug? Are there any better ideas than what I am coming up with? Would it just be cheaper to buy another router that is cooled correctly? ! ! ! ! ! !
I have friends and relatives that would like to do some memory and compute intensive tasks, but lack the hardware locally. I have loads of ram doing nothing and a little compute to spare. Is there a way for me to set up some service accessible to them that would allow them to spin up VMs, similar to Linode or DigitalOcean? I know letting outside access to a proxmox server would be disastrous. I guess I could setup a VPN server into a virtualized proxmox server? Would rather find a way to point them to a url with a username and password and have them able to use my server as their vps like AWS or Linode.
first off, thanks for everyone and their suggestions, and apologies for not responding back, was having issues with my personal lemmy instance.
I took everyone's advice and have gone test print crazy. I will attach the pictures to this post. I have tried to understand what I am looking at on my test prints in relation to what is not configured correctly on my printer. it's just not clicking. most of my prints look fine, the surface has good infill and the part looks ok from the outside, like benchie. but underneath, it looks like I am having either adhesion issues, bridging problems and support problems as well. but adjusting setting as suggested in here and here did not really improve anything, and in some cases made the print worse.
I am using the Flashprint slicer that came with the printer. I have tried cura and prusaslice and can't even get a print started on those, even with a raft. I'm sure they are better slicers that what Flashforge makes, but again, something just isn't clicking. any further advice would be greatly appreciated.
I am trying to finally get my homelab organized, and I need assistance visualizing my network. I am just wondering if there are tools out there that assist with this. I have tried the paint and gimp routes, and I find myself spending more time trying to make it look good and organized rather than actually mapping my network. Is there any utility out there that is purpose build just for visualizing network topology? Or am I better off with just graph paper, pencil and a straight edge?
Thinking of lining the inside side panels of my 48u rack with some sort of sound deadening material. Was going to go with rock wool or the cheap self adhesive foam bricks you can buy off amazon. Was thinking of doing the same thing to the ceiling above where my rack sits and the walls behind as well. Mainly trying to cut down on the echo and high frequency whines. Anyone have any advice or suggestions? Maybe talk me out of it, or some other solution?
Not sure if this has come up, but one UI element I liked from Apollo and “the-one-that-shall-not-be-named” was the floating button in a thread that would take you to the next top level comment in that thread. Not sure what this feature is called, but so far can’t find it in any Lenny/Kbin client. Is this something that is in Memmy’s pipeline?
Just picked up an APC 48u server rack. There were no pictures of it in the post and I did not notice until I got it home and set up, that the rack rails have threaded holes instead of square cage nut holes. I can’t seem to determine the thread size and pitch, and have a thread gauge coming. Until then, does anyone know anything about this? The people I grabbed it from had used self tapping machine screws and drove them in with an impact wrench. Is this what APC had intended, or is there some $300 proprietary screw I have to buy from them?
Just picked up an APC 48u rack. The listing had no shots of it, and I didn’t notice till after I got it home and set up, the rack rails do not have square cage nut holes, but what appear to be threaded holes. I can not find a bolt or screw with the right size and thread pitch. It looks like it’s an M5 fine thread, but wanted to see if anyone had any info on this. Am I just supposed to get self tapping machine screws, like the previous owner did? Or is there some APC proprietary bolt that I’m working with here? !
Running proxmox 8.0.3, spinning up new VM, noticed my netboot was SSLLOOWW. ran speedtest-cli in the host shell, was getting 4Mbits/s, ran on a VM on that same system, was getting 500-600 Mbits/s. I have NO clue what to make of this. Is this a bridge issue in proxmox? I don't think it's a DNS issue, everything else is working, business as usual, even still serving plex and arr on the same system. Any ideas to get me running in the right direction?
Edit: It's DNS. It's always DNS. Disabled AdGuard Home and magically speeds on the host were back. Confused, but have a direction at least.