The Oregon Senate passed a bill updating laws around electric bicycles on Monday. It's named for a Bend teen killed in a collision while riding an e-bike last summer.
It does say class 1 can be operated by anyone, but 2 and 3 can be limited to 16 and older. Yes that's more restrictive then the past, but really it's "Defining the e-bikes" because they were poorly defined based on an almost hundred year old law.
That being said it does limit the top speed of an e-bike to 28 miles an hour, I assume above that it's now a motocycle, and honestly, that might be a good thing, because at that speed they no will come out of no where (hell at 20-30 miles an hour they still will)
As far as I read/understand, nope. But if it does limit the assistance to 28 miles an hour, that might be required if the bike goes above that speed. (Note: that's only the point where the power would stop assisting, not the fastest speed the bike can do.)
I have a Class 3 (28mph), it’s actually not too bad. That assumes the brakes are well-maintained, though, and as we know there are no inspections for e-bikes. I’ve seen some terrifyingly bad brakes on normal bicycles, so I can’t imagine what some people’s e-bikes look like.
It should be mandatory for Class 2 and Class 3 e-bikes to have hydraulic disc brakes imo. I have mechanical disc brakes, and I have to tighten them at least once a month. It seems unwise to trust that the average person would also do that. Rim brakes are right out; they have nowhere near enough braking power for the speed and weight of most e-bikes.
Most people that do longer rides would be fine with that. On downhill sections you can hit that easily enough, and there's wind too. It's definitely fast, but it's fine enough. It doesn't matter what you're driving or riding, you always drive to the conditions anyways.
I did way more than 1000km/month on my bicycle back in my time. I know what happens when you are stupid enough to break with the front wheels only. Even with disk brakes on both wheels you don't have enough contact with the ground to ride at such speeds in a traffic-safe way. That's why I object to the idea that a bike with 28mph would be safe, and would definitely require insurance for such a vehicle.
The brake reaction time normally used in design, therefore, is 2.5 seconds.
Stopping distance in a car is therefore 140.22 ft.
Do you think that you can't do equal or better on a bike?
Any situation that you believe a car can do safely, there's no reason to believe a bike couldn't either. FFS we have these wonderful things called motorcycles. Much less contact with the ground [than a car], much higher speeds. Works just fine.
The braking characteristics are not all that different from a normal bike to an ebike, provided they weren't deliberately ignored. Ebikes having a lower centre of gravity also helps this. If you want to whine about ebikes going 28m/h, you should also be complaining about 80% of the cyclists out there.
I feel like you're missing that the brakes on current (decent/non-shit) bikes are quite satisfactory. And that cyclists normally dont ride at 28mph, unless going downhill. And that regardless of vehicle, it is up to the rider to be safe for the conditions.
It is not the brakes as such, but braking, which has a number of factors. One key factor is friction between wheel and surface. Your brakes might bring your wheels to a quick standstill, but that might not stop the bike.
And the 28mph stem from the point that there are electric bikes that go up to that speed.
Yes, locking up your wheels is bad. The same is true on a car. It is good that on small mechanical systems with feedback, it is easy to not lock up the tires.
On top of that, many ebikes have regenerative breaking, which makes it easy to maintain a good speed.
I ride a class 3 and 30mph is not that bad. I regularly hit that coming down hills, even on a non-ebike. It does require your attention to be on the road and it would hurt if you wiped out. My fastest ever was 44mph
I'll run a test at some point. Definitely faster than a car, but my bike has nice brakes. Not every cheap Chinese budget bike is going to have these brakes.
Also, because my ebike is relatively light/average, there is a "wind wall" at around 20 mph where aerodynamics become more effective than pedaling. Sitting up and stopping pedaling when I've been hunched over pushing hard will quickly bring me back to 15-20 mph. I don't know where this wind wall is on a heavy ebike with fat tires, a heavy rider, and a rack full of luggage.
To the point of braking for pedestrians, on paved trails, I always ring my bell until people acknowledge me in some nonverbal way and I slow down for dogs because they can be startled by fast bikes. I've had many peds thank me for ringing the bell on a trail and I'm convinced if everyone did it, 2/3 of the bike/pedestrian animosity would instantly dry up.
Cars don't care around here. They only see their phones, traffic lights, and the back of the car in front of them.
Odd, may I ask about your approximate geography? My area is very suburban and bikes mix with peds better than cars here because most of our streets are 6 lane roads with 40-55 mph speed limits. (45-70 mph actual speed) If the speed limits were 25-35 mph I would probably ride on the road a lot more.
Maybe we could get signage that clearly displays a bike's information such that a hit & run wouldn't be impossibly easy. Maybe we could make it made of Metal so it's durable. Call it a License Plate.
This doesn't seem so bad. I live in the PNW and have seen people absolutely hauling ass on home-made e-bikes and scooters, easily 40mph and passing traffic in the bike lane.
I'm not against people building their own e-bikes, but at some point it's not an e-bike, it's a motorcycle, and they need to be in traffic and ideally have the brakes to match.
Yeah, imagine using rim brakes at 40 mph. Good luck with the inevitable crash with absolutely nothing to cushion or take the hit for you(no crumple zones).