I just bought a new PC, based on Lenovo Legion gaming desktop.
It comes with
2 USB port in the front, 4 regular USB port in the back + 1 USB-C port. That's a total of 7 USB slots.
It's been like 2 decades that every possible hardware device comes with an USB interface. Keyboard, mouse, joystick, hard-drive, memory stick, headset, webcam, spot/photo camera, and many others.
Of course it's my fault, I should have thought about USB connectors when shopping for a new PC and check before buying. but seriously, 7 USB slots is so few compared to all the device I have using USB
Keyboard, mouse, usb extension to have a port on my desk, wireless charger, dac, xbox wireless controller dongle and a usb microphone. That's 7 and I'd use an 8th port to charge my vr headset. So yeah, it's not that hard to use 7 ports at once.
Yes, it is. Are you familiar with any usb spec? The ports in your pc simply cannot even deliver 240W. Also, rying to use pretty much any cable to deliver that kind of power would melt it.
To add to that, there's a data throughput limit (important for a VR headset, external drives, etc) . There's also the latency aspect. I would not like to connect my controller dongle, dac, mouse or kb to a hub for example because that adds unnecesary latency. There are several reasons for using a dedicated port for each device and power has nothing to do with it.
Why would you charge things from your PC?
Are you really this dense? Why would I not? It's not only convenient but it's also because I don't have that many outlets available after plugging in 2 studio monitors, 2 displays, a laptop for work and my personal PC.
Really, it's pretty unvelivable that you'd defend putting in the minimum amount of ports possible considering current chipset capabilities and the sheer size of the required ATX rear panel size. In case you're unfamiliar, here's the ATX spec. Not to mention that motherboards are getting more and more expensive and there's no excuse for increasing cost and reducing functionality.
Some people like them for the aesthetics. In my case, I have a custom made desk with a tray for the keyboard and mice so the cables are not even visible. Longevity wise they're obviously inferior and have an expiration date basically. The performance is also worse unless you're using a wireless dongle instead of bluetooth.
I just see three cables on my desk for keyboard, mouse, and headphones and I prefer it like that.
Aesthetics are illogical and often times social conformity rather than personal desire. Like those stupid coiled USB C cables for keyboards that do nothing.
My keyboard has a 2.4ghz dongle, bluetooth and wired connectivity. I choose to use it wired because it has lower latency and I don't have to worry about the battery dying. The mouse is wired and I chose the wired version because it costs half as much (razer deathadder v3) and I don't really have any benefits if'd bought the wireless version (which also uses a dongle). A bluetooth mouse would have much higher latency and a lower polling rate. Same thing with the controller. Bluetooth is slower and not as reliable. Regarding the mic, yeah, no. It's the mic I use for my camera as well and I'm not buying a dedicated wireless mic that would be more expensive and have a lower audio quality. Also, and this goes for everything, batteries can flat out die and they're usually not user replaceable. Not to mention that you have to charge all of these battery powered things and that's a pain in the butt.
I have 4 things plugged in permanently (mouse, keyboard, audio interface, wireless headset receiver). It used to be 5 but I haven't used my wireless controller since I built this PC.
I have a midi keyboard I plug into the front when I'm going to use it. And a USB cable in the drawer if I ever need to plug my phone in (which otherwise sits on a wireless charger plugged into AC)
My bedroom media pc (old-ass enterprise tower) has 8 on the back and 5 on the front. So 13 usb ports. It doesn’t have any wireless anything, physical ports only, and there’s no room to add internal cards for it, but plenty of usb ports for dongles!
I use 3 of those ports at most (I use Ethernet, since it’s my acquisition machine, or it’d be 4), and 2 are for keyboards and mice (one handheld with touchpad, the other a normal set).
I’m struggling to even come up with 7 things that would all need to be plugged in together.. I guess webcam, mouse and keyboard if they can’t run off a single port, and headset maybe if you got one that bypasses the audio jacks for whatever reason.. but that’s still only 4.
Chipsets have tons of connectivity available, there's more than enough physical space in the back panel and it's not expensive to add. So yeah, your analogy doesn't make much sense.