I thought it might be interesting for anyone planning to upgrade their standard Voxelab Aquila to see what I did to mine. Print quality increased much, even though there are printers that are even better (of course).

I got this one back when it was on sale at amazon for around 150€. I wasn’t planning on getting a 3D printer and had absolutely no idea what rabbit hole I am going to fall into. I just got a bonus at work at that time and thought „why not“. Since then I thought about upgrading to a better printer a few times, but as I became father two times in the last two years I always decided on saving the money and just go with some improvements for my Aquila. So over time it transformed into what you can see here.

I will try to list all of the upgrades, but I might forget some. So if you have any questions, feel free to ask.

Upgrades:

• DirectDrive

Creality Offiziell Sprite Direct Drive Extruder SE für Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro/CR-10, Edelstahl Dual Gear Upgrade Ender 3 Extruder, Unterstützt die Meisten Hotend https://amzn.eu/d/1lhH7JU

• Ender 3 Pully Backplate with official Ender 3 Hotend Kit (got this one as I had some serious trouble with my Hotend not extruding anymore as filament got stuck. Turned out I have to leave the enclosure open for PLA… But I just leave it as it is now)

• Enclosure

SUNLU 3D-Drucker-Gehäuse, konstante 3D-Drucktemperatur für ABS 3D-Drucker-Filament, Ender 3/3 PRO 3D-Drucker-Gehäuse, bietet viel Platz, feuerfest, Größe 650 * 550 * 750mm https://amzn.eu/d/eHXB8Kb

• Filament Dryer as direct Feed

eSUN Trockenbox für 3D Drucker Filament, eBOX Lite 3D Drucker Hält das Filament Trockenbox, Staubdicht und Feuchtigkeitsdicht, Kompatibel mit 1.75mm, 2.85mm, 3.00mm Filament https://amzn.eu/d/idSAFa2

• PEI printed

COMGROW PEI Sheet 235x235mm, Pei Druckplatte for Creality Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo/Ender 3 V2 Neo/Voxelab Aquila 3D Drucker https://amzn.eu/d/0GWosXC

• Placed the display outside the enclosure using an enlargement cable

POPESQ® 1 STK. x IDC Verlängerungskabel 10 polig 50cm 2.54mm Verbinder / 1 pcs. x IDC Extension Cable 10 Way 50cm 2.54mm Connector #A1917 https://amzn.eu/d/iPmrouH

• Placed MainBoard and PSU outside the enclosure using some printed parts to protect them (and myself because I tend to touch it accidentally)

• Raspberry Pi 3B+ running Octoprint

• Some cheap webcam to have an eye on my prints using Obico with Octoprint

• Temperature and Humidity Sensor I placed inside the enclosure to have an eye on it over the webcam

• 3D Printed parts

Riser feet for better airflow (might be outdated because of the electronics now being placed outside the enclosure). Webcam Mount, cable chain, LCD mount, Filament Dryer shelf, MainBoard and PSU enclosures.

Here are some additional more detailed pictures:

!

!

!

The webcam view:

!

I am not happy with how the electronics are placed outside right now as it looks kinda improvised (what it is…), but I didn’t want to enlarge all of the cables. Maybe that’s work for future upgrade time.

So as I said, if there are questions I am happy to try to answer as helpful as I can :)

geteilt von: https://lemmy.world/post/6685982

> So a while ago, right after I ordered my Retroid, I quickly realized that there are no boxes available that fit my needs, so I decided to make one using my 3D printer. This was the result: > > ! > > ! > > But since then I got some accessories for it and wanted it to have a bit more space for those, plus I upgraded my printer to now be able to print TPU Inserts, so I took the chance to renew my old design. Here are the results: > > ! > > ! > > ! > > ! > > Here a comparison in thickness between the two: > > ! > > If you are interested in printing your own. Both versions and all the files with instructions are available for free on my printables: > > https://www.printables.com/de/model/470203-retroid-pocket-3-rugged-travel-case/comments

So a while ago, right after I ordered my Retroid, I quickly realized that there are no boxes available that fit my needs, so I decided to make one using my 3D printer. This was the result:

!

!

But since then I got some accessories for it and wanted it to have a bit more space for those, plus I upgraded my printer to now be able to print TPU Inserts, so I took the chance to renew my old design. Here are the results:

!

!

!

!

Here a comparison in thickness between the two:

!

If you are interested in printing your own. Both versions and all the files with instructions are available for free on my printables:

https://www.printables.com/de/model/470203-retroid-pocket-3-rugged-travel-case/comments

As title says. I got myself a filament runout sensor, wired it, designed and printed a holder for it and now I am experiencing some issues. I hope someone here can help me.

At first, the sensor is doing its job and seems to be working as it should. Printing is possible, but only with extra steps I would like to avoid. I use this sensor:

Creality Offiziell Filament Runout Sensor Kit Ender 3 Filament Erkennung Modul Detektor Gerät Original Pausen Erkennungs Monitor für Ender 3Pro, Ender 3 V2 mit 32 Bit V4.2.2/V4.2.7 Motherboard https://amzn.eu/d/3aR6o2e

I am using it on my standard Voxelab Aquila running Alex firmware. Slicing in Astroprint and managing over Octoprint on a raspberry pi.

The problem: The runout sensor sends a false positive right after starting a print. It draws the first line on the printbeds side and then stops telling me the filament ran out. It then proceeds to unload the filament and asks me to change it. I then re-insert the „new“ filament, it extrudes a load and then prints just fine.

So as you have possibly guessed right, I want it to print right away, just stopping the print, if there really is some jamming or no more filament left. Does someone know if I have to adjust the start commands or something like that? It seems to be a software problem.

Thanks in advance for any help!

Update: I gave up on this project and sent the sensor back. I couldn’t get it to work even after modifications to the firmware. Too bad…

So as title says I revived my beloved iPod, upgraded its storage and also modeled and printed some accessories for my iPod. I made a TPU case, a dock using the original cable and a storage box.

Everything is available for free on my printables:

https://www.printables.com/de/@Gorroth1007/models

Link to my first post (including whole storage upgrade process):

https://lemmy.world/post/3243217

Here are some additional pictures:

!

!

!

!

!

In the last years I read already a few times about the iPod now being super upgradable to an SSD or micro SD nearly as big as you want.

Source: https://hackaday.com/2022/02/16/classic-ipods-are-super-upgradeable-in-2022/

So I looked up the parts already a while ago on Amazon, but they were pretty expensive, so I decided to wait or don’t do it. But a few weeks ago I saw one part being available on AliExpress, so I instantly looked up the other parts and ordered (round about 30€). See below for part links (just for example). Last week all parts arrived and I started my project and put everything together. If you also want to do that, here is a link on how to dis-/assemble the iPod:

https://de.ifixit.com/Anleitung/iPod+5.+Generation+(Video)+HDD+durch+CF+oder+SDHC-SDXC+Speicher+ersetzen/7492

As I wanted to minimize the risk for shorts and loose parts inside, I 3D-printed two thin layers of TPU to place between adapter and backplate and between adapter and board.

!

!

I then assembled everything (without closing the case!) and restored the iPod using my old MacBook (2013 - running macOS BigSur). I restored the partition in finder and then restored the iPod with Apple Music. Tried with windows first, but couldn’t get it to work. Works like a new one now! Definitely recommend if you have one laying around.

Ask me if you have any questions :)

The printable case I made is available for free here:

https://www.printables.com/de/model/554008-ipod-classic-5g-30gb-case-with-hexagon-back

!

!

!

Parts:

CF to microSD Adapter:

https://de.aliexpress.com/item/32969402274.html?spm=a2g0n.productlist.0.0.24ce72daqORMJv&browser_id=962e1e44ceee4c6c9d9c6091befb193d&aff_platform=msite&m_page_id=eeceeeccdcbefbd189fa2949ff11243daa41127157&gclid=&pdp_npi=4%40dis%21EUR%219.07%217.26%21%21%219.67%21%21%40211bda9b16921191572525772d071f%2166649911527%21sea%21DE%213959202765%21&algo_pvid=9e3d8cec-8d2d-457c-99ab-488d594cf9ec&_universallink=1&m_page_id=eeceeeccdcbefbd189fa2949ff11243daa41127157

CF Upgrade Card:

https://de.aliexpress.com/item/32841639355.html?spm=a2g0n.productlist.0.0.24ce72daqORMJv&browser_id=962e1e44ceee4c6c9d9c6091befb193d&aff_platform=msite&m_page_id=eeceeeccdcbefbd189fa2949ff11243daa41127157&gclid=&pdp_npi=4%40dis%21EUR%212.61%211.83%21%21%212.78%21%21%40211bda9b16921191572525772d071f%2165127709746%21sea%21DE%213959202765%21&algo_pvid=9e3d8cec-8d2d-457c-99ab-488d594cf9ec&_universallink=1&m_page_id=eeceeeccdcbefbd189fa2949ff11243daa41127157

Shell replacement (optional):

https://de.aliexpress.com/item/1005004601572132.html?spm=a2g0n.productlist.0.0.1b1f5f7afDD4iS&browser_id=962e1e44ceee4c6c9d9c6091befb193d&aff_platform=msite&m_page_id=eeceeeccdcbefbd189fa2b5ca820dc6e624e22d6eb&gclid=&pdp_npi=4%40dis%21EUR%2119.77%2119.77%21%21%21153.63%21%21%40211beeec16921192993844874d0775%2112000029788970474%21sea%21DE%213959202765%21&algo_pvid=6d6d105c-ec1e-4187-b4e6-45f1a85b0999

Edit/Update:

I made a dock for it, that works with the charging/sync cable and fits my case.

!

!

Here are the print files for the dock:

https://www.printables.com/de/model/555680-ipod-dockstand-for-gorroths-tpu-case

Edit/Update 2:

I now also made a storage/travel box you can 3D-print available to download here:

https://www.printables.com/de/model/565265-ipod-classic-5-box-inkl-kabel-management-airtag-ed

Look at my post on the box here for details:

https://lemmy.world/post/4144089

The other ones:

!

!

!

! !

!

!

!

And today evening I will print a case for my recently upgraded trusty old iPod:

!

Update:

After a few changes the second prototype came out great, files also available for free now on my printables:

!

!

!

!

Was gifted some old lights that were designed to be stuck into holes in wood. Didn’t want to drill holes that big into my kitchen cabinets, so I designed and printed these holders that can be screwed to the cabinets and hold the lights. Also the lights are surrounded by it, so they don’t glare. Here are the results:

!

Combined it with two smart plugs, one that’s connected directly to the lights and one that sits in the socket right under the light switch. The one under the light switch is configured with a „scene“, that means if I press the little button on it, the plug connected to the lights will turn on, allowing me to use it as physical remote switch, while still being able to use the socket.

Was gifted some old lights that were designed to be stuck into holes in wood. Didn’t want to drill holes that big into my kitchen cabinets, so I designed and printed these holders that can be screwed to the cabinets and hold the lights. Also the lights are surrounded by it, so they don’t glare. Here are the results:

!

Combined it with two smart plugs, one that’s connected directly to the lights and one that sits in the socket right under the light switch. The one under the light switch is configured with a „scene“, that means if I press the little button on it, the plug connected to the lights will turn on, allowing me to use it as physical remote switch, while still being able to use the socket.

I thought maybe someone is planning in upgrade their Voxelab Aquila (or Ender 3) the same way as I did, so here is what I did:

I used the original Satsana Model and changed it, so that it now supports the use of two 4010 fans (like noctua - for extra silence), also supports a DirectDrive and can function as base for a cable chain if used. I use it with my Voxelab Aquila, but as I upgraded to DirectDrive it now uses the same mount for fans as an Ender 3. Available for free here:

https://www.printables.com/de/model/537209-dual-4010-directdrive-cablechain-compatible-satsan

I used this DirectDrive Upgrade Kit:

UniTak3D Ender 3 Direct Drive Upgrade-Kit Conversion-Halterung für Ender 3 V2, Ender 3 Pro und Voxelab Aquila 3D-Drucker Compatibel with BMG Dual Drive&Bowden Extruder&Dual Gear Extruder(NOT for Neo) https://amzn.eu/d/g7KH2nK

Also I used this fans:

Noctua NF-A4x10 FLX, Leiser Premium-Lüfter, 3-Pin (40x10mm, Braun) https://amzn.eu/d/ff9L8Rv

And this cablechain:

https://www.thingiverse.com/thing:4725903

Additional photos:

! ! ! !

Hello everyone!

I am dealing with a slightly warped print bed. Smaller prints are no problem and come out absolutely perfect (for me), but as the prints get larger and go near the sides of the printbed they won’t stick very good, because the bed is a bit more away from the nozzle on all sides, causing my prints to warp or even fall off the printbed.

So now I am thinking about upgrading my Voxelab Aquila with a BLTouch (or similar) to get rid of that problem. So far I read you could use Voxelab‘s Aquila X2 BLTouch Firmware with the standard Aquila?! Is that true? Does someone here know it or already upgraded one? Or maybe have a link to a tutorial?

Any help appreciated! Thanks in advance :)

I wanted to place this filament dryer I got myself recently directly above my printer. So I designed and printed this shelf. It prints in parts to get as strong as possible and can be assembled using M3 screws. If you are interested, files are available here for free:

https://www.printables.com/de/model/539326-esun-trockenbox-wandhalter-esun-filament-dryer-wal

Pretty impressed how well that one turned out. Used SUNLU TPU in yellow with 200/50 degrees Celsius at 20mm/s speed on my Voxelab Aquila (upgraded PEI bed and DirectDrive, also used Filament drybox).

This filament to be exact:

Angebot: SUNLU TPU Filament, 1KG Flexibles 95A TPU 3D Drucker Filament 1.75mm Maßgenauigkeit +/- 0.03 mm, Hohe Liquidität und Elastizität, 1KG（2.2Lbs) Spule, TPU Filament für FDM 3D Drucker,TPU Gelb https://amzn.eu/d/7H5TLjr

! ! !

As title says. Today I upgraded my Voxelab Aquila to a Direct Drive and as you easily can see I am in desperate need for a new fan shroud to make everything fit perfectly. Unfortunately I lost my fusion 360 file for the one I currently use. It uses two 4010 Noctua fans and as there was no fitting fan shroud out there I made one. The direct drive now has holes for fan shroud mounting like the Ender 3, not the Aquila anymore, so I will have to do quite some changes.

This one if someone is interested:

https://www.printables.com/de/model/462590-dual-4010-fan-satsana-for-voxelab-aquila

So it would be appreciated very much, if someone could provide me a file I can load into my fusion360, so that I can once again design one that fits perfectly.

As title says. Recently learned about piped.video for YouTube, so now I am wondering if there is a more secure and private way to watch TikTok Videos? Doesn’t matter if an App or via browser. I am using iOS, but I am curious about all options if there are any.

Pictures that were posted within the text are hardly accessible, some not at all.

I don’t know if it’s already a known issue and if someone is already working on it, just wanted to quickly inform about this issue. Thanks for your awesome work and developing this app!

Got this Victorinox Vx Sport EVO Backpack from my beautiful wife as birthday present recently! I was looking at these a few years now and I am super happy with it. It comes with 11 years of warranty and feels well made and durable (as known from Victorinox). Went with me already on a few adventures and I can tell you it works well for Notebooks, Picknicks, even as diaper backpack or just random stuff. Fits all my needs. I also like the little details like a small compartment for one of their Swiss Army Knifes (unfortunately too small for my Cybertool L, but perfect for my folding Victorinox Lunch Knife).

Edit: @IronRain requested some detailed pictures, so here they are:

! Here you can see the compartment that’s right at your back. Easily fitting a notebook and a tablet. Or in my case most of the time my iPad and my adventure diary. The zipper has built in holes, so you can secure it with a small lock (which doesn’t come with the backpack).

! ! Both of these pictures are the middle or main compartment. Here you can fit in a lot of stuff or an additional compartment organizer (took it out for the picture) like I do to further organize things. Also there is a small net compartment for easier access to small things.

! Here you see the front compartment. With a few smaller compartments built in you can organize small items. But as you - hopefully - can see, there is still room in the bottom of the compartment, so it’s a little bigger as you might think (at least it’s bigger than I thought). I really like what Victorinox did here, as there is a padded compartment for like your phone (the one where you see my wallet sticking out). Also there is a hanger for keys (using it for my insect bite healer, AirPods and all kinds of random stuff that can be attached). And of course I need to mention the SAK Compartment! I love that Victorinox did this! While not big enough to fit my Cybertool or a SwissChamp, you will perfectly get a Hunstman, Deluxe Tinker or even Outrider in there. I just use it for their foldable Vegetable Knife, which prepares my lunch on the go. And what you don’t see on any of their own pictures, there is an additional small compartment over the one for the SAK. Big enough for a pen or the Victorinox Blade Sharpener, as you can see in the picture.

I hope that gives you a better look into the backpack and helps someone decide if it’s the right one. From my side I definitely recommend this one!

Edit 2 - Even more pictures:

! Notebook compartments‘ lock

! Main compartment with Organizer

! Phone compartment fitting an iPhone 13

! Trying to fit the cybertool L into the SAK compartment (as big as the Swiss champ)

! ! Huntsman in SAK compartment

And here some more detailed pictures of the outside: ! ! ! ! ! !

My Voxelab Aquila came with a standard glass printbed. So far I thought I had no issues. Recently I thought I will printing PETG a try. Result -> no chance to get that print from the bed without damaging one of both (of course I let I cool down first). But even before I had more and more adhesion problems. So after a few friends suggested I gave the magnetic PEI printbed a try and so far I have to say I am pretty happy with it. Prints stick good and come out great. Should have done that already a while ago. Oh and because I was already working on it I changed the bed leveling springs to rubber buffers. Seems a lot more sturdy now.

3D-printed this Key Organizer. It also holds an Apple AirTag. Not completely my design, I redesigned an existing model to better fit my needs. I also stamped my name into the back of it (only in my personal version).

If someone owns a 3D-printer and is interested, the files are available here for free:

https://www.printables.com/de/model/530841-remixed-keytag-key-organizer-m3-attachment-loop