Folks in North America, where do you like to get PC parts online these days?
Folks in North America, where do you like to get PC parts online these days?
It's been awhile since I looked into building a PC, so I'm not sure what some of the better stores may be, or which may have swapped hands/changed approaches and aren't as reliable as they once were.
Thanks in advance for any suggestions/advice!
Try using pcpartpicker.com. You can do your build on the site and it will list the best deals for the components you choose. As a bonus it will check to see if there are some glaring incompatibilities at the same time.
I love this site so much. As someone who's not got much of a tech backgroung, it's been massively helpful in building and upgrading my PCs.
As a bonus it will check to see if there are some glaring incompatibilities at the same time.
I'd heard of the site but for some reason I'd forgotten this part. I'll definitely use it for that at a minimum (and maybe for sourcing parts as well depending!), as I have a habit of missing some tiny detail that happens to relate to compatibility.
Watching this thread. I've been LOST ever since Fry's fell apart. :(
Microcenter is great, especially for nerds. Sucks if one isn't close, but they ship.
My best buys were always at fry’s.
And if you wanted delicious fries, your best buy was not at Best Buy but rather Five Guys Burgers and Fries.
The last computer I built (not for me) was a mix of Amazon, Memory Express and Canada Computers (got the list from PC PartPicker).
Amazon had the memory and CPU I wanted; MemEx had the mobo, PSU and case; and CC had the monitor. I tried to get everything from MemEx though, but they just didn't have everything I needed.
May be worth mentioning that NewEgg is now hellah anti-consumer. I would avoid them at all costs.
Pre-2014 or so I was 85% Newegg or more.
Post, I've been 85%+ Amazon. I buy from B&H when I can, but honestly Amazon tends to dominate the PC partlicker list.
To clarify - I removed Newegg from the vendor list. Won't even look at them.
I haven’t been able to leave them entirely, but I try to avoid B&H as much as I can. They were sued by the federal government twice over civil rights violations, particularly for their treatment of Hispanic employees. It wasn’t just stuff like not promoting employees and paying them less, but Jim Crow-era stuff like not allowing them to use certain bathrooms, as recently as the past decade. Once I could’ve written off as some bad manager, but the Feds sued them again a decade later and it was basically all the same stuff, so to me that’s a cultural problem.
I also worked at a manufacturer where they were by far our biggest reseller, larger than everyone else combined including our own direct sales. They were a giant pain to work with; every interaction felt like they were flipping us a giant middle finger. Our accounting team especially hated dealing with them; we got some new people in who figured out they were always trying to claim discounts and refunds they weren’t entitled to. If our people pushed back and could show they weren’t allowed they would cave, but it took a lot of their time every month. I try now to buy from their smaller rivals like Adorama or AbelCine even if it might cost a little more; most of them were so much nicer to work with.
I'm trying to hold off as a new microcenter will open this year in town
Charlotte gang
Newegg, Amazon, BestBuy. Every so often one or the other will come out with a great price on a component. I keep my ear to the ground on Slickdeals and /r/buildapcsales and cherry pick anything that sounds good.
Can I have some of those negative downvotes?
spoiler
This took me a minute to see what was wrong here, but that's really strange, isn't it?
Bizarre.
I built a computer last year. Parts were sourced from Newegg, microcenter, and Amazon.
I did this exact same combo. PCpartspicker helped find best deal for each component between the three.
Microcenter is my 1st priority, I've heard of Fry's on the west Coast.
After that, Newegg
Newegg has really gone downhill since 2016.
I can still get great shipping times if I get stuff that's "shipped by Newegg" but the selection is incredibly limited.
Yeah, they used to be the only place I shopped for parts, until the change in ownership tanked the quality of their listings and customer service.
Yeah that's fair and they aren't my first choice but I trust them to be reliable. If they have what I need then I know I can buy the product and receive it.
Fry's is dead. They do not exist anymore in any real capacity. https://www.theverge.com/circuitbreaker/2021/2/24/22298616/frys-electronics-going-out-of-business
What pissed me off the most about that: they just closed the stores without any "going out of world sale"
That being said, when i last visited Fry's, about 6 months before they shut down, there was nothing worth buying. They were putting gamer chairs(tm) everywhere, because they had an overstock. Printer paper, ink cartridges, canned air dusters and gamer chairs on every isle.
Memory express and Canada computers
B&H in New York has some pretty good inventory, usually. I’ve bought a lot of stuff from them through the years.
I cheat and drive to Microcenter. It's about an hour south and worth it.
They sell online and I'd try that if I lived too far away to drive.
Depends on my laziness. I just bought parts for my new rig on Newegg. I was going to do microcenter, but they didn't have everything I wanted.
I usually buy used refurbished components from reputable stores. Likely eBay too. Being in the tech industry I realized how mind bogglingly cheap even slightly "old" hardware is. If you want an entry level/mid tier you can buy a used office PC with an i7 8700k or something (make sure that specific model has GPU power overhead) and buy a refurbished gtx 1080 ti. Make sure to add an SSD if it doesn't have one already. In fact skip the HDD and buy a high capacity SSD, they are cheap nowadays.
Just got a 2t Samsung ssd for well under 100 bucks. Good stuff.
Since Fry's closed only Amazon and Newegg remain as primary part sources, both of which are shitty companies. Closest Microcenter is ~500 miles away.
Microcenter, Newegg, Scamazon. In that order.
Mostly Amazon, myself.
If one wants an occasional old gizmo that's no longer made, eBay can be helpful.
Specifically for cables -- which aren't that pricy relative to other items people buy, and are often marked up a lot by retailers -- I've gone to Monoprice for quite some years. Useful if getting a bunch of cables.
I got an old gaming laptop on eBay for like $300 that I take with me on work trips. The person just upgraded or something and wanted to get rid of it.
I know people sometimes have bad experiences on ebay, but I feel like if you message the seller and feel out the situation in advance, you can avoid a lot of the problems. I always try to buy from individuals vs. from someone whose entire business is selling on ebay, and I've never been burned.
Depends on what you want. Newegg, eBay, Amazon, Jawa.gg, Liquidation.com, Shopgoodwill.com, FB Marketplace, Craigslist, Garage sales, Auctions
I get computer parts from all these sources.
Probably not for everyone, but Facebook marketplace with local pickup is really good for some parts. YMMV
I was planning on buying an RX 6700XT from Newegg for $450ish, but instead managed to get a 6600 (non XT) for $80. I then found a 6700XT a month later for $300, bought it, and gave the 6600 to my cousin's kid.
I also bought a shitbox I turned into a Plex server for $75.
I usually walk into Best Buy or order from B and H photo video.
I'm from the UK and ordered a GPU from B&H as they had a sale on and as a result it was a bunch cheaper - there was a some confusion on the billing address (mine doesn't fit nicely in a US format & so got messed up when they tried to store it or something along those lines) but they were great to deal with about it so I'd definitely recommend them also
Usually Newegg and Amazon, sometimes NextWarehouse for things I'm not in a rush for (they do a lot of drop shipping from the distributors/manufactures themselves so it's sometimes cheaper but also slower). B&H is also worth a look, sometimes they do price drops on things & end up being cheaper than the other places.
There's a local Best Buy near me that's in a special tax district (lower sales tax) so I could try checking them out but usually the prices there are marked up so much that it's not worth it IMO.
There aren't any Micro Centers near me, it'd take a fair amount of travel to get to one.
Most of the parts for my last 2 builds have been from Micro Center, but if I’m just buying one or two components I hit up my local Best Buy first, and then Newegg if Best Buy doesn’t have what I want.
Canada Computers and sometimes Memory Express.
Newegg or Amazon.
For cheaper items, I unfortunately use Amazon. I try to do my research and avoid scams. For more expensive items, I've used a variety of methods such as eBay, my friend, and a stranger posting on (also unfortunately) Facebook Marketplace.